Smart Alarm Anti-theft motorcycle for worldwide use motorcycle tracker

Product Description

1.Product name:

Smart Alarm Anti-theft motorcycle for worldwide use motorcycle tracker

Model: SK**1IR

Power ****6VDC < *0mA

Response: ~2ms

Relay: *0A *4DVC



2.Advantage of SAMURAI SK**1IR

* Do not use battery power at break, so do not affect the battery.

* Easy to install, no need to cut power cord or change the car's electrical system.

* High security chip card (contains 4.*8 billion codes) can not be forged.

* Large memory device recognizes up to 3 valid chip cards included.

* Electronic chip is imported genuine.

* Quality is recognized by the General Department of Standardization, Metrology and Quality in accordance with the quality management system standard ISO********0.

* High signal sensitivity, longer chip pick up distance, more usable.

* Combines all types of keys, anti-vam, key break. The car locks when the machine is shut down. The key is still not bootable.

* Only for startup vehicles when a valid identification chip is registered.

* The system will disconnect the power and alarm after 5 seconds to alert in case of illegal unlocking.

* Warranty *4 months, renewal in the first *2 months not repair equipment.



3. Operation mechanism

The Samurai SK**1IR intelligent motorcycle anti-theft system operates on principle

"CAN NOT FIXED, NOT MOTORIZED VEHICLES"

Installation Guide:

• Locate the power cord after the lock.

• Splash the power cord after the lock out. Red-wire connection The white wire of the serial device connects to that location. Red wire on the side of the lock and black wire on the side of the car.

• The green wire of the device matches the green wire (whistle).

• Black wire of the device against the battery.



 

Note:

• Turn off the ignition key before and during the installation of the appliance.

• Determine the correct color of wire when connecting.

• Attach the antenna just below the locking catch to match the electromagnetic distance, not to exceed 6cm.

• For vehicles with inverted jacks, use the jacks.

• Do not install the controller near a heat source