Sodium naphthalene formaldehyde-SNF

Product Description

Sodium Naphthalene Sulfonate is high Range Water-Reducing Admixture.



Uses

Sodium Naphthalene sulfonate produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps.

Sodium Naphthalene sulfonate is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation.



Sodium Naphthalene sulfonate Specification:

Solid Content *2% min

Moisture 8.0 % max

Fineness 5.0% max

PH value 7 - 9

Chlorides Content 2.0% max

Surface Tension ****2 Mn/m

Cement Flowing Rate **0mm min

Concrete Reducing Water Rate *8% min

Sodium Sulfate Content *8% max (5%max is also available)



Addition Rates

Sodium Naphthalene sulfonate can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.*5%.

Sodium Naphthalene sulfonate Direction

Prepare solutions as required.

Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: *0%).

The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds.

Sodium Naphthalene Formaldehyde Package, Storage & Handling

For powder: Woven fabric bag with plastic liner. Net weight: *5kg +/- 0.1 kg.