Spectrum Analyzer

Product Description

• Frequency
» Range : 9kHz to 3.0GHz
» Resolution : Minimum 1Hz
» Span Range
› **0Hz/div to **0MHz/div
› 1,2,5Steps Selection(Automatic), ZERO Span, FULL

Span(9kHz to 3.0GHz)
» Frequency Selection : Start, Stop, Center Span Setup
» Span Accuracy : ±3% within a designated Span range

» Readout Accuracy : ≤ ± (Indicated frequency x Reference
Frequency Accuracy + Span x Span Accuracy + *0% of
RBW)
» Phase Noise : ≤ **0dBc/Hz(Based on *0kHz Offset)

• Amplitude

» Range : **0dBm~***5dBm, **0dBm~***0dBm
(Pre Amp ON)
» Average Noise Level(1kHz RBW, *0Hz VBW)
› ≤ ***5dBm : **0kHz~2.7GHz

› ≤ ***7dBm(Pre Amp On) : *0MHz~2.7GHz
› ≤ ***0dBm, ***3dBm(Pre Amp On) : 2.7GHz~3GHz
› ≤ ***0dBm(Pre Amp On) : Typically

» Amplitude Unit : dBm, dBmV, dBμV, V, mV, μV, W, mW, μW

» Display Scale Linearity
› ≤ ±1.5dB/*0dB(*0dB/div), ≤ ±1.5dB/*0dB(5dB/div)
› ≤ ±0.5dB/8dB(1dB/div), ≤ ±0.5dB/*6dB(2dB/div)

» Frequency Response(Based on OdB Atten)
› *3.5~1.5dB(**0kHz~*0MHz)
› ±1.5dB(*0MHz~3GHz)

» Reference Level
› Range : *0dBm~**0dBm
› Resolution : 0.1dB
› Accuracy : +/*1.5dB

» 2nd Harmonic Distortion : ≤ **0dBc, **0dBm Input

» Intermodulation Distortion : ≤ **0dBc, **0dBm Input

» Residual Spurious : ≤ **5dBm(Input Terminated 0 dB
Attenuate)

» Other Input Spurious : ≤ **0dBc, **0dBm Input

» Resolution Bandwidth
› Selections : 1kHz, 3kHz, *0kHz, *0kHz, **0kHz, **0kHz,
1MHz, 3MHz, 9kHz, **0kHz
› Accuracy : ±*0%
› Selectivity
· *0dB/3dB ratio < *5:1
· *0dB/6dB ratio < *2:1(9kHz, **0kHz)
› Switching Error : ≤ ±1.0dB(1kHz Reference RBW)

» Video Bandwidth : *0Hz to 3MHz in *****0 ste

• Sweep
» Rate : **0 ms to ***0 sec, *0 ms to ***0 sec(Zero Span)

» Accuracy : ≤ ±*0%

» Trigger Source : External(Rear), Video, Freerun, Line

» Trigger Modes : Continuous, Single

» Trigger Level : TTL Level

•Memory
» Trace·Setup Storage
› Trace Storage : Maximum **0 waveforms
› Setup Storage : Maximum ***0 states

• Screen Display
» Type : 6.4″Color TFT LCD
» Display Resolution : **0(H) x **0(V) active display area
» Marker Modes
› Peak search, Delta marker, Marker to Center
› Marker to Reference(8 Markers Maximum)

• Input
» RF Input Connector : N type Female, *0 ohm Nominal
» VSWR
› **0 kHz~3.0 GHz, VSWR<1.5:1(Based on 0 dBm Ref
Level)

» Maximum Input Level : 0 VDC, **0dBm 

• Standard Frequency(*0MHz, Ref.)
» Temperature Stability : ±0.5 ppm
» Aging : ±0.5 ppm/Year
» Connector : BNC Female
» Input Level : *5dBm to **5dBm
» Output Level : *0MHz, *8dBm nominal

• Interface
» RS***2C
» Printer
› Driver : PCL Command, HP, EPSON, Laser-Jet, Desk-Jet
› Connector : Standard *5 Pin female D-Sub using
Parallel Connector
» USB Host
› Printer Driver : PCL Command, HP, EPSON, Laser-Jet,
Desk-Jet
› USB Storage Device : Supports 1.1 and 2.0, image file
for storage, GIF format
» Ethernet(Option)
› **-Base-T Ethernet : Supports Internet Remote Control
» GPIB Interface(Option) : IEEE **8 bus
GENERAL CHARACTERISTICS
» Dimensions : **0(W) x **5(H) x **5(D)mm
» Weight : *0 kg
» Warming up time : *0 minutes for the precision
measurement
» Power
› Source Voltage and Frequency : ******0 VAC at
*0/*0Hz
› Power Consumption : *0 Watts maximum without
options
» Operating Tempcerature : 0'C to *0'C
» Storage Tempcerature : **0'C to *0'C
» RF Emissions, Immunity
› RF Emissions : EN ****1, FCC PART*5 Section *5.**1
» RF Immunity : EN ****6