SSP sintering machine

Product Description

Machine features:

1. With metal molds, you can make any shape, no longer limited to graphite molds. For conventional sintering, the processing capacity of the complex-shaped segments will decrease each time, and this phenomenon does not occur in single segment sintering, especially for the complex-shaped segments.



2. Single-piece production can ensure that the process conditions of each segmen are consistent to the maximum limit, that is, the pressure and temperature are constant, and the quality stability of the segments sintering is ensured.



3. High efficiency, two workstations produce two segments per minute on average, and a single machine can produce more than 2,**0 pieces under a twenty-hour working system a day. (But this needs to be different from the conventional sintering process commonly used in China. Conventional hot pressing sintering can reach about *0,**0 pieces per day)



4.The production cost, currently conventional sintering is generally **0kwh, while the single-segment hot-pressing sintering machine is only *0kwh. The actual production test can reduce the single-blade sintering by more than *6%, which means that half of the electricity can be saved.



5.Without manual mold loading and unloading, it can run semi-automatically, and one worker can take care of 4 workstations at the same time, saving manpower. At present, labor is relatively expensive. According to relevant valid data, for the cutter head with less than *0 pieces of modulus in a single installation, single cutter head sintering can save *6% of the labor cost.