TBHM series High pressure jet
filter:
1.Tangent air inlet
design
2.Particle>1 um,
efficiency>*9.5%
3.Air pressure: 0.4~0.5M
TBHM
series High pressure jet filter
1.
Principle
- The machine has a
round body which comprises of by three parts: top air tank, middle
body and bottom part. Filters are fixed on the top part and hung in
the middle part. The dusty air is aspirated into the machine
tangently from the inlet which is normal on the middle body. The
air goes through the filter cloth while most of the dust adheres to
the outside of filters. Pumping air puffs the filters and adhered
dust is shaken away from the filters. Dust falls down to the bottom
and then is collected and discharged from the bottom. The clean air
goes out from the air outlet which is equipped on the top
part.
2.
Features
- Advanced design and
excellent fabricating.
- Tangent air inlet
design can separate bigger dust particles, reduce the load of the
filters.
- High efficiency, particle <
1 um, efficiency > *5%
- Particle
> 1 um, efficiency > *9.5%
-
With solenoid valve controller and digital control meter, easy
initializing the pumping length and interval. 2 or 3 filters are
controlled together as one unit.
- The rising
air pressure: 0.4~0.5MPa, normally using air
compressor.
- BWF filter cloth ensures the
de-dust efficiency and wear resistance.
3. Application
-
Widely applied in flour mills aspiration system and pneumatic
transferring system for separating the dust or material from the
cleaned air.
- Can also be used in the
blowing line as a discharge equipment.
-
Wildly applied in feed mills, rice mills and other grain processing
plant mills for the same use.
4.
Specification
