The ink pump

Product Description

Pictorial machine maintenance notice:

1. Ambient temperature to keep at room temperature (about *2 degrees Celsius), have certain humidity, dust small as far as possible.

2. Regular maintenance of machine, reducing dust, ink, etc. The impact on the machine, the car sliding axis Daily is wiped, use a clean cloth or paper towel and alcohol, or use the transformer oil; A small brush ink cartridges (black ink head box) weekly cleaning, remove the water wash, brush and ink don't lost and correct place; Grating a weekly cleaning, daily observation, swab with distilled water or alcohol wipe from top to bottom, not too strong; Ink with the ink head of contact daily inspection, to ensure that no stain, can use alcohol to clean, but not too much alcohol may dissolve microcircuit pasted on solid glue;

3. Note that cannot use oily ink, oily easily corrosion for the ink system and blocked the ink head, original ink is the best choice for you.

4. Can not be charged any line pull plug on the machine, otherwise will cause damage to the motherboard.

5. Pay attention to the ink head don't wipe the nozzle, can be used with ink not depilate cloth or good quality paper towels to absorb glue dry, otherwise may lead to blockages in the ink hole.

6. The machine must be connected to ground; When the dry air, static problem that nots allow to ignore, when using some lamination and light medium, take electrostatic charge (especially) when into the paper work soon. Electrostatic charge can lead to the machine and the ink head of security is damaged, will take the ground wire is the only way to electrostatic discharge. Because the static power itself is a huge, so when charged the ink head operation, ensure that the hands have discharge (contact grounding metal body or wear in addition to electrostatic bracelet), otherwise easy to cause the ink head damage of individual ink.

7. Can't use manual paper knife in the machine to cut paper, and this will spend paper machines mesa to recognize abnormal.

8. Big cuhk filled in the ink cartridges for the ink system should maintain a stable 1/**3/4 or so, there should be no air bubbles in the refill tube, the new ink to head before installation should be equipped with *0 ml of ink, otherwise may cause the leak of ink or not.