TRZ-2017 full automatic conical paper tube production line

Product Description

TRZ***17 fullautomatic conical paper tube production lineincludes three parts: reeling part, drying part and after finishing part. Itneedsno manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming and themain engine transmission uses cam timing mechanism. Each position takes double speed variable frequency control technology. The none mechanical abrasion photoelectric control, approaching control and pneumatic delay control are also applied, which realizes the mechanical and electrical integration. It achieves low labor, low consumption, high efficiency and high quality, which is suitable for the production of conical tubes with various specification. All bearings used in the machine are Japan NSK bearings.

Process:

Raw paper rolling**-Internal and external printing**-Edgegrinding**-Cutting**-Reeling**-Drying**-Collating**-V-shapedopening cutting**-Opening polishing**-Linepressing**-Head reflecting**-Galling**-Productfinishing

    Mainparameter

    Power: *9.2kw  

    Speed: *5pcs**0pcs/min

    Size: ****0mm****0mm****0mm

Operator: 1

Weight: *4T

Appliable paper size: **0gsm***0gsm

Appliable glue: white glue/starch glue

Compressed air: 1.2m3/min, 0.8MPa

1. TRZ****7 full automatic conical paper tube production line reeling part

TRZ****7 full automatic conical paper tube reeling machine is suitable for conical tubes of various specifications, which molds at a time. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling and head cutting, the high-strength semi-finished paper tubes with same caliber and tapers will be sent to the dryer. The reeling  machine takes double speed various frequency control technology. The reeling speed can be adjusted automatically. The whole process is connected with the drying machine, simplifying the complex system to achieve twice the result with half the effort. It is suitable for conical tubes with various tapers and calibers. All bearings used in the machine are Japan NSK bearings.

Main parameter

Speed: *5pcs**0pcs/min

Power: *3.*7kw

    Size: ***0mm****0mm****0mm

2. TRZ****7 full automatic conical paper tube production line drying part

TRZ****7 full automatic conical paper tube production line drying part with auto-temperature control uses chain-type circulation and thermal cycle drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome. Paper tubes can be feed and collected automatically after connected with other equipment. All bearings used in the machine are Japan NSK bearings.

Main parameter

Speed: *5pcs**0pcs/min

Power: *0.1kw**4.5kw

Size: ***0mm****0mm****0mm

3. TRZ****7 full automatic conical paper tube production line after finishing part

TRZ****7 full automatic conical paper tube after finishing part is designed to turn the semi-finished products into high-quality conical paper tubes after cutting V-shaped opening, grinding, pressing, reversing, galling, automatic counting and stringing, which molds at one time. The speed of the machine can be adjusted freely. The reliable over-loaded protection and non-normal stop equipment guarantee the safety and stability of the process and lower the waste rate. The machine can be used with principle  machine or be used individually as well. It is very suitable for conical tubes with various tapers and calibers. All bearings used in the machine are Japan NSK bearings.

Main parameter

Speed: *5pcs**0pcs/min

Air pressure: 0.3mpa*0.4mpa

Size: ***0mm****0mm****0mm  

3.1 TRZ****7 full automatic conical paper tube production line after finishing machine

TRZ****7 full automatic after finishing machine is designed to turn the semi-finished products into conical paper tubes, which molds at one time. The machine is very  ideal after finishing equipment of high quality conical tubes. It has step-less transmission, which can be adjusted freely and be able to work in the production line or be used individually. It is suitable for conical tubes with various calibers and tapers. All bearings used in the machine are Japan NSK bearings.

Process:

Automatic feeding**-Automatic distributing**-Head reflecting**-V-shaped opening cutting**-Line pressing**-Galling**-Automatic counting**-Automatic string**-Drying

Main parameter

Speed: *0pcs**5pcs/min

Power: 1kw

Air pressure: 0.4mpa*0.5mpa

Size: ***0mm****0mm****0mm

Operator: 1