Two parts addition liquid silicone for tire molds

Product Description

Two parts addition liquid silicone for tire molds Description

HY- E series addition molding silicone could be mainly used for making concretestones, wax molds, PU molds, resin molds, gypsum casting, candle molding andchocolate, candy and any other FDA food product mold making, prototyping etc.HY-E**0 Silicone Rubbermake tire pattern molds.

*

*high tensile and tear strength with high copy times

*very good flow and easy for pouring operation

Product

E***0

Appearance

 Translucent

Hardness(shore A)

*0±2

Mix ratio(A:B)

1:1/*0:1

Viscosity Part A(mPa.s)

****0±***0

Viscosity Part B(mPa.s)

***0±**0

Tensile strength (kgf/cm2)

*5±5

Tear-strength  (kN/m)

*0±2

Elongation(%)

**0±*0

Pot life/working time (mins)

****0

Curing time/setting time (hrs)

**4hrs(*5°C)

(Please note: the above data for this product in *5 temperature, *5percent humidity conditions, for reference. The accurate data is measured by customers when using.)

Operation instruction of two parts addition liquid silicone for tire molds:

2. Weigh the two part correctly by electronic weight in two separate container.

4. And get the mixture for vacuum-pumping for de-air the bubble in around **3minutes. (If there is no vacuum machine, pls pour the mixture carefully and slowlydown the side of the mold frame so that less bubbles caused)

6. Clean your products and brush a layer of release agent(detergent or soap water) onyour product.

As our E-series silicone is platinum cure silicone , which is very easy to cause

1. Liquid condensation silicone ( condensation silicone not completely cured or organictin compounds )

3. Amine compounds as well as contains the amine materials.

Two parts addition liquid silicone for tire molds SHELF LIFE:

If ratio is 1:1 :Packed in *0kg/pail + *0kg/pail and **0kg/pail + **0kg/pail.

Any more information, pls feel free to contact Bella at any time.

MOB:***************2

Skype:bellajiaqi