Ultra-thin Suspension Tester

Product Description

The need for Suspension Test (from CTC)

Why is it so important to keep good tire contact? All actions a vehicle performs – acceleration, cornering, and braking are transmitted through the tires. The tires perform all these actions through a phenomenon called friction. The most important rule of friction is that the more two objects are pressing together the higher the frictional forces between them. Therefore, it is necessary for the tire to be pressing firmly on the road at all times if the vehicle is going to brake and turn.

Even shocks that are only half as good as new can significantly impact stopping distances. The Cologne Institute for Traffic Safety tested a vehicle with partially worn shocks and then tested the same vehicle with new ones. The used shocks increased the vehicle stopping distance by *1 feet, a *3% increase! (See chart.) Twenty one feet is about 1 1/2 car lengths – more than enough distance to prevent serious injury and property damage.

The same rules apply to cornering. In an emergency situation you need as much contact between the tire and road as possible. Without maximum contact the vehicle might not be able to perform the emergency maneuver necessary to prevent injury and property damage.

The average age of vehicles on the road today is 8 1/2 years and is continuing to increase. Thus, an increasing number of vehicles are going to need shock service.

Unfortunately, customers do not often identify the need for shock replacement because the change has been so gradual that they have accustomed themselves to the degraded ride. Repair facilities can do their customers and themselves a service by identifying those worn safety components. 




Features:
1. Ultra-thin bench no need pit to install.

2. Low noise vibration design.

3. Vibration-measurement sensor can catch the process of the vibration and display the result in the curve diagram on the screen analyzing the road grip performance.

Technical Parameters:
Max axle load:                        1.5T
Max through axle load:          2.0T
Power supply:                         **0V / *0HZ
Motor power:                            1.5kw×2
Track:                                         **0～***0mm
Amplitude:                                 6mm
Frequency:                                *3Hz
Weight:                                       *6kg
Dimensions:                             ***0X**0X**0mm