VP-TDM**0E is a new
generation analog card with interchangeable FXS_**0 and
FXO_**0 modules. It can eliminate the requirement for separate
channel banks or access gateways.
VD-TDM**0E*2U contains 4 module banks. Each bank
supports one analog interface. The module banks may be filled
with up to FXO_**0 or FXS_**0 modules enabling the creation of
any combination of ports. Scaling of an analog card solution is
accomplished by simply adding additional cards.
VL-TDM**0E works with Asterisk®, Elastix®,
FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR
projects as well as other Open Source and proprietary PBX,
Switch, IVR, and VoIP gateway applications.
Main Features:
1 High security: It adopt tertiary
thunder preventing technology, can prevent the thunder and
lightning from striking effectively.
2 No additional power connector or
supplier is required for the operation of FXS modules, reduced
the line wave of the power, has improved the voice
quality.
3 World Wide Usable: Configurable
line interface to meet global telephone line interface
requirements.
4 The PCI plug is based on PCI
Express 1X. User could choose any of combinations of FXO_**0 or
FXS_**0 modules according to customers
requirements.
5 *2 bit bus master DMA data exchanges
across PCI Express interface at **0Mbytes/sec for minimum host
processor intervention.
6 The high stability firmware is
exported / imported with DMA data exchange, so it accelerated
and reduced CPU load greatly. Under the environment of the same
hardware, CPU rate of utilization is equal to CPU rate of
utilization of using 4 port analog card.
7 It supports all the functions of
Asterisk PBX systems needed.
8 Exchangeable with Digium modules:
It is mixable with X**0M/S**0M of Digium
9 Humanization is designed: The
module socket that should be nipped is all adopted and stuck to
one slice of sockets, can prevent stabing users finger
effectively.
New function:
1 Easy to install , using
way is same as DIGIUM Asterisk card
2 If use
Trixbox/Elastix/Freeiris2 IPPBX software, it can automatic
recognition our cards, dont need to install any
drivers.
3
for 2U classis high
Product Spotlight
TDM**0E is
a new analog card. It can be used for connecting analog
telephones and analog POTS lines through a PC. It delivers
the superior voice quality on both FXO and FXS interfaces
in all 4 ports.
· Adjustable Interrupt Routing
Design
· Interrupts Frequency
Adjustment
· Up to 4 Simultaneous PSTN
Calls (Per PCI Slot)
· Compatible with All
Commercially Available Motherboards
· *-Month No Question Asked
Return Policy
· Lifetime Warranty
Target Applications
· Channel Bank Replacement /
Alternative
· Small Office Home Office (SOHO)
applications
· Small and Medium Business (SMB)
applications
· Gateway Termination to analog
telephones/lines
Services and Features
· Caller ID and Call Waiting
Caller ID
· ADSI Telephones
· Loopstart Signaling
Support
Technical Specifications
· Up to 4 ports through a
combination of FXS_**0 and FXO_**0 modules
· Full-length analog
card
· Up to 1 quad FXS or FXO
modules
· RJ*5 connector
· **-bit *3MHz PCI-E and fully
PCI-E compliant, compatible with all commercially available
motherboards, and proper sharing of PCI
interrupts
· *2 bit bus master DMA data
exchanges across PCI interface at **2
Mbytes/sec
· Autosense compatibility with 5
V and 3.3 V PCI busses compatible
· Power: 8.*1W Minimum, *8.*4W
Maximum at 3.3 V or 5 V.
· Operation temperature: 0°C to
*0 °C
· Storage temperature: **0°C to
**5°C
Operating Systems
· Linux (all versions, releases
and distributions from 1.0 up)
Minimum Hardware
Requirement
· ***-Mhz Pentium
III
· **8MB RAM
· Available PCI Slot
Products Size: *6cm*7cm
