Water-type mold temperature controller

Product Description

Water-type mold temperature controller

1.Mode of operation of mold temperature controller

*Imported PC microcomputer touch-control , Overall nice .
*Automatically exhausting after ONE-TOUCH powering on, which can  automatically heat when finishing air removal from the mould.

2.Machanical pipeline systems of mold temperature controller

*Welded **4 stainless steel integrated pipelines for less pipe resistance , uniform heating.
*BY-PASS pressure release loop for hot oil, alarm of water depletion, protect pumps and heaters.
*Rapidly heating and steadily cooling , it will spend approximately *5 minutes heating to **0C at the empty load condition. 
*Circulation pump uses "Oakland" **0C water pump with high pressure and high flow, good thermal conductivity effect, mould's temperature increase quickly and temperature  difference is little, energy-saving will be more than *0%.
*Using a flange type stainless steel electric heating tube which will be suitable for different temperature usage, imported heating wire with long performance life is not easy to burn out ..
*Pressure indicator .
*Electromagnetic valve which is original imported from Taiwan UNID, its tolerant temperature is **0c.
*Rewater thermometer will monitor whether the mold hole is obstructive and injection molding condition is stable or not.
*High voltage security protecting systems, explosion-proof device.

4.Electrical systems of mold temperature controller

*Using Fuji no-fuse switch to protect from short circuit and overload.
*Electromagnetic contactor use France "Schneider" or Germany "MOELLER",
longer working life.

*Japan original imported "OMRON" or UK "WEST" double resistance P.I.D automatically calculus-glass LCD temperature controller. (Both heating and cooling have PID automatic calculation function, temperature control more precise energy saving) saving power over *5%.
*Perfect safety protection , process fault display , easy repair and maintenance even without proffesionals.
*Surge filter and drain device adapt to unstable voltage environments.
*Original imported PC Board adopts DC circuit control , resistance to outside interference, low voltage and long service life .
*France "Adams High Road" or Switzerland "CARENS" , power supplies open phase and reverse phase protection function to protect the normal operation of the pump.
*The electrical control box adopts isolation design that can effectively reduce the operating temperature of electrical components, extending their life.

5.Safety protection of mold temperature controller

*Total power over current no-fuse circuit breaker.
*Motor reversing protection and indicator light .
*protection of cooling water shortage and indicator light .
*Overload protection of circulating pumps and indicator light .
*BY-PASS pressure release loop for hot water .
*Power supplies open phase protection.
*High-voltage explosion-proof device .
*The exception of explosion-proof buzzer
 

 Some special specifications may be customized!