Wdm 10/100m single fiber Media Converter

Product Description

NF-E**0 WDM Media Converter Bi-Directional 1FX*1TX SC/PC Connector *******0 Km

1. Detailed Product Description
NF-E**0 series enables network managers to connect *0 Mbps and **0 Mbps twisted pair network segments and active equipment to fiber optic cabling more cost-effectively than ever. WDM Technology Combines Dual Fiber Cables into Single Fiber. Greatly save the Installation cost of Expensive Fiber Cable. Both a media and data rate converter, NF-E**0 series features *0/**0 auto-negotiation on the twisted pair port while the fiber port operates at **0 Mbps. NF-E**0 series converters are ideal for any premises FTTD, LAN-to-LAN or LAN-to-WAN fiber networking applications.

2. Key features
NF-E**0 WDM Media Converter Bi-Directional 1FX*1TX SC/PC Connector *******0 Km
1. Detailed Product Description
NF-E**0 series enables network managers to connect *0 Mbps and **0 Mbps twisted pair network segments and active equipment to fiber optic cabling more cost-effectively than ever. WDM Technology Combines Dual Fiber Cables into Single Fiber. Greatly save the Installation cost of Expensive Fiber Cable. Both a media and data rate converter, NF-E**0 series features *0/**0 auto-negotiation on the twisted pair port while the fiber port operates at **0 Mbps. NF-E**0 series converters are ideal for any premises FTTD, LAN-to-LAN or LAN-to-WAN fiber networking applications.

3. Key features
Complies with IEEE**2.3 and IEEE**2.3u *0/**0Base-TX and **0Base-FX*0/**0Mbps and full/half duplex automatically configure in TP portMDI/MDI-X Auto Negotiation
Max transmit packet(s): ***0bytesWDM Technology Combines Dual Fiber Cables into Single Fiber. Greatly save the Installation cost of Expensive Fiber Cable
LFP Function(Link fault pass through)
1. ON**- The function is usable.
TX=>Fiber: If TX port link down, then converter will forced fiber to link down. Fiber =>TX: If Fiber port link down, the media converter will forced TX port to link down.
2. OFF**-The function is disable
Notice: When you turn the switch to ON or OFF to change current mode, please make sure power turn off and turn on again!

4. Technical Specification
Standard **2.3 *0B-T, **2.3u **0b-Tx&**0b-Fx, **2.3x, **2.1. P
Wavelength TX***0nm/RX***0nm or BIDI TX***0nm/RX***0nm; TX***0nm/RX***0nm
Fiber cable 8.3/**5, 8.7/**5, 9/**5 or *0/**5single-mode
Connector RJ**5 Jack and Fiber optic connectors: SC connector
Cable Model and Length Twisted pair Cat. 5 UTP Cable: **0m
Buffer memory Max transmit packet(s): **8Kbyte
Switching mechanism Forward&Filter Rate: ***0bytes Store &Forward*0b-T( *4, **0PPS**4bytes), **0b-Tx/Fx
(**8, **0PPS**4Bytes)
MAC Address and self-learning 1K
LED Indicators POWER, FX LINK/ACT, **0, TP LINK/ACT, FDX/COL.
Power supply 2A *5V
Environment Operating temperature: *2 to **2F(0 to *0ºC)Storage temperature: *4 to **0F (**0 to *0ºC)Relative humidity: 5% to *0%
Size *6.5mm(H)x *0.5mm(W) x *4mm(D)
Emission FCC/CE

Fiber optic details:
Single mode *0 km Min TX TWR: **0dB, Max TX PWR *6dB, Rx-sensitivity (**4dBm), Link Budget ( *4.0dB)
Single mode *0 km Min TX TWR: *5dB, Max TX PWR 0dB, Rx-sensitivity (**4dBm), Link Budget ( *9.0dB)
Single mode *0 km ***0nm DFB laser, Min TX TWR: *5dB, Max TX PWR dB, Rx-sensitivity (**4dBm), Link Budget ( *9.0dB).