Wifi GM MDI 2 Multiple Diagnostic Interface Compatiable with Original GM Software

Product Description

WIFI GM MDI 2 Multiple Diagnostic Interface with V***1.*0.1 GDS2 Tech2Win Software Sata HDD for Vauxhall Opel Buick and Chevrolet
 
Highlights:

1. Wifi GM MDI2 with V***1.*0.1 GDS2 Tech2Win Software Sata HD, plug and play.
2. Work on all GM CHEVROLET BUICK CADILLAC GMC HUMMER  PONTIAC SAAB Vauxhall/Opel *6 pin vehicles from ***6 to ***2.
3. High-quality Vauxhall/Opel dealer diagnostic interface with Global TIS, GDS 2, Tech2Win software.
4. Support Protocols: UART, Class 2, KWP***0,GMLAN (CAN)
5. Support online programming function with GM SPS Subscription (Need to Buy Addtionally)

GM MDI 2 Features:

● Uses a new, more secure Type B connector and Ground Offset Failure protection. A wired connection is recommended for longer programming events.
● The MDI 2 is powered from the vehicle battery via the DLC Cable. It may also be powered over USB to perform firmware updates only using a PC.
● Uses USB 2.0 for faster firmware downloads instead of a separate AC power supply.
● The DLC cable is twice as long as the previous cable and connects at the top, making it easier to use. The cable only connects to the MDI 2. 
* Automatic vehicle recognition
* DTC reading and removal
* Complete list of live data streaming for all main ECU
* Recordable / playback of live data
* New software flash for existing ECU to fix drivability issues
* Programming and installation of new ECU (PCM, ABS, Instrument cluster, air bag, fuel pumps etc.,)
* Programming new keys
* Setting / removing speed limiters
* J***4 pass thru offering ECU re-flash and diagnostics for other vehicle manufacturers, when subscribed to their specified software
* More dealer specific functions
 
The J***4 Configuration Application

The Multiple Diagnostic Interface (MDI) is a J***4 device that connects between your computer and the vehicles J***2 DLC connector for pass-thru programming of the vehicle's ECU. The J***4 Configuration Application is installed onto your PC at the same time as the MDI Manager software allowing you to control how your TIS 2 Web application will connect to an MDI. In addition, this application provides API Monitoring controls to aid in investigating problems encountered while using any J***4 devices (including the MDI).

To launch the J***4 Configuration Application from SPS, press the "configuration" on the Diagnostic settings screen.

Engine Compartment

Check Engine Compartment for components which may be loose; kinked or pinched vacuum hoses or electrical connections, and for any other missing or disconnected components.

Check to assure that hoses and electrical wires are properly routed to provide sufficient clearance with adjacent moving or hot parts.

Observe the movement or freedom of movement of linkage, valves and other components.

Check for unusual noises within the engine compartment.

Visually inspect for seepage and leaks at hoses and pipe connections, seals, gaskets and plugs.

Tighten clamps and connectors as necessary.

Check power steering gear, lines and hoses for leaks and clearance with adjacent panels, moving or hot parts. Tighten clamps and connectors as necessary.

Test engine coolant protection.

Check all fluid levels; engine oil, transmission oil, power steering oil, battery, brake, and cooling system.

Add inspection items as needed

....
Package List:

1pc x GM MDI2 Main Unit
1pc x DLC Cable SAE J***2
1pc x **-ft USB A to USB B Cable
1pc x Ethernet Cable
1pc x **0GB GM MDI 2.5" SATA HDD