Wireless Home GSM alarm system with LCD

Product Description

Wireless Home GSM alarm system with LCD
Description and Main functions:

1. With English/Spanish/Chinese/Russian version;  
2. *4 wireless zones & 2 wired zones,  
3. Can connect wireless emergency , wireless PIR sensor, wireless door/window contact, wireless smoke detectoretc. Each wireless zone can match numberless wireless sensors. 
4. With LCD display and control keyboard on the mainframe. 
5.  Can send SMS to 3 pre-set mobile phone numbers and auto-dial 3 pre-set phone numbers while alarming. 
6.  Support two-way video communications  
7. With function of arming at fixed time  
8. Control the alarm system by Control keyboard ,remote control or SMS. 
9. Modify wireless zonesname and check the system status by SMS. 
10. Can define the wireless zones as arm/partial arm by control keyboard on the mainframe.
11. Have the function of voice record for *0 seconds.  
12. Have the function of the delay alarming (need to select)
13. Switch to backup rechargeable battery when the power fails or cut by intruder. 
14. Can monitor AC power status ,this system will send SMS to mobile phone while AC power is not ok  
15. Wireless emergency function (*4 hours zone):can press the to alarm immediately to get help in case of emergency. 
16. Can send alarm signals to monitoring center through GSM network, such as the police station 

Specification of main unit:

Output power: DC*2V

Input power: AC**0V to **0V,*0Hz or *0 Hz

Working hours of standby Battery(DC8.4V):More than *2 hours

Wireless frequency for above **5MHZ/**3MHZ

Includes:

One alarm host (main unit)

One Wireless door/window magnetic contact

One PIR sensor

Two remote controllers

One siren (More than **0DB)  

One AC adapter        

One English user manual

Usage

1. Arm/disarm by remote controller

a) Arm: Press   on remote controller, the host will make di sound, the LCD display is on,   is twinkling. *0 seconds later, the host enters into arm mode and the   is on. If you want to arm the system quickly, please press .

b) Partial arm: press  , the host will make di sound, the LCD display is on.   is twinkling. *0 seconds later, the host enters into partial arm mode and   is on. Press the , the host will enter into partial arm mode immediately.

c) Disarm: Press to close the system, the host enters into disarm status after the host makes di, di sound and the is on.

Disarm by keyboard on the host

In arming status, press "Disarm" , when SET, appears on the LCD display, then Input: password + OK will disarm

2 .Emergency alarm

When an emergency alarm occurs, press and the host will enter into emergency alarm status immediately and the siren will alarm for *0 seconds to inform the neighbors. At the same time, it will automatically dial the preset alarm phone numbers cycled for three times and send SMS of Emergency alarm

3 .External power failure alarm

When the system checks out that there is something wrong with the external power or the external power is off for more than 2 seconds, it will enter into alarm status immediately. At the same time, the system will automatically dial the preset phone numbers cycled for three times and send the SMS of External power failed.

When the power supply is on, the system will stop alarming immediately and send the SMS of External power is OK.

4 .Alarm and Handle

The siren sounds loudly for *0 seconds to inform the neighbors. At the same time, the system automatically sends SMS alert and auto-dial the preset phone numbers by turn. The user can listen to the pre-recording warming voice and enter monitoring status which supports intercom function.

The system will auto-dial the next phone number if the phone line is busy or cant put through. It will stop to call the next one when somebody answers the phone. If nobody answers the phone, the system will stop dialing after auto-dialing circularly for three times.