4E1 8E1 16E1 fiber optic transmitter PDH Optical Multiplexer

Product Description

Product Introduction DLX-OP*4/*8/*6 Optical Transmitter & Receiver is PDH optical transmission equipment with high capability. Adopts especial CMOS chip, provides *6E1 digital signals multiple connection, branch connection and optoelectronic switching, realized the long-distance data transmission. Main channel is 4E1/8E1/*6 E1/G.**3 ports, offers one channel official telephone connection for the two stations communicate. RS**2 low rate data channel, 1*1 Fiber back up, 1*1 redundant power supply,1~4 Ethernet channels and network interior management channel optional(Inside installation administration of network channel can be used to the network management domiciliary transmission and switching, and realize the remote monitoring of equipment.).
This product possess loop back function of the local end and the far end for test and fault location via set up DIP switch in the near end device. Possess perfect fault self-diagnostic function, supports optional Link-Loss alarm function, 2Mbit/s circuit alarm and sound alarm. Possess alarm sound and circuit shielded function. Adopts *6B5H line coding, transmission rate is *2.*4Mbit/s, support Single-Strand bi-directional mode or Double-Strand bi-directional mode, meet the different demand of client.
It has high integration degree, high reliability, low power consumption, small in size and consummate function. Adapt to point to point optical transmission link circuit and provides public network and special network with high quality, flexible and reliable optical transmission digital line. It sits perfectly on the network client of telecom, mobile, electric power, police, petroleum and so on.
　
  Product Feature ●*9 inch rack, 1U height
●Offers one channel two line official channel for the convenience of connection between two station
●Inside installation network management channel and function, offers long-distance management device.
●Supports alarm function by sound and light
●Optical port: FC, ST and SC optional
●Single-Strand bi-directional transmission and Double-Strand bi-directional optional
● Supports spur-track occupied indication and alarm sound shielded function
●Supports loop back between the local end and the far end
●Adopts manifold power supply: **8VDC, **4VDC or **0VAC
●Easy to installation and has high reliability
　
  Technologies reference ●Fiber interface: SC. FC or ST optional
●Light source: single-mode ***0nm/***0nm
●Transmission Light Power: ≥－*2dBm
●LED: ≥－*5dBm
●LD: ≥－8dBm
●Receiving sensitivity: ≤－*8dBm
●PINFET: ≤－*1dBm
●Transmission code: *6B5H
●Light port rate (Mbps): *2.*4Mbit/s
●Optical line code: HDB3
●Data rate: ***8Kbps
●Tolerance: ±*0ppm
●Interface standard: ITU－TG.**3
●Line impedance: *5ohm(unbalance)
●Connector: BNC
●Indicator:
PWR: Power Indicator
BER: Bit Error Rate Indicator
RMA: Remote End Equipment Indicator
LOF: Near End Frame Indicator
RNL: Near End Optical Fiber Receive Indicator
PHONE: Office Phone Indicator
●Dimension: **0mm×**0mm×*4.5mm