SLD Horizontal Multistage Pump

Product Description

Model SLD pump consists of four parts, stator, rotor, bearing
and shaft seal:
1.Stator consists of inlet, middle and outlet sections and
the guide vane etc., with the take-up bolt tightly clamping
all sections to form a working room. The inlet of it stands
horizontally while the outlet vertically upward.
2.Rotor consists of the shaft, impeller, balancing disk and
muff etc., the shaft passes the power to the impeller to have
it work; the balancing disk balances the axial force; and
replaceable muff is mounted on both sides of the shaft to
protect it.
3.There are rolling and sliding bearings:
The rolling bearing consists of bearing seat, bearing and
bearing gland and uses grease for lubrication.
The sliding bearing consists of bearing body and cover,
liner, dust-proof disk, oil leveller, oil throwing ring etc., and
uses thinned oil for lubrication.
4. The shaft is sealed with stuffing and the shaft seal consists
of the sealing contents, stuffing, baffle. The liquid in
the sealing work-room functions water-sealing, watercooling
and water lubricating and the water for watersealing
comes from the pressure water inside of the pump.
In addition, the pump is directly actuated by the prime mover
through the elastic clutch and, viewing from the prime
mover, moves CW.
Amechanical seal can also be used upon the requirement
from users.