U Shape Silicon Carbide heating elements for Metallurgy Industry

Product Description

U Shape Silicon Carbide heating elements for Metallurgy Industry

VINER Industrial U type Silicon Carbide SiC heating elements are constructed to from a U-shape. Consequently Type U have the terminals at one end for a single-phase power source. This reduces the number terminations and cold ends thus enabling energy savings.

The technical parameter of VINER Industrial U type Silicon Carbide SiC heating elements:



When you place an order of the VINER Industrial U type Silicon Carbide SiC heating elements, please give following information:

OD: Outer Diameter;

HZ: Length of Hot Zone;

CZ: Length of Cold Zone;

OL: Total Length,

A: Shank Spacing

 

Order Sample of the VINER Industrial U type Silicon Carbide SiC heating elements

 

U type: OD=20mm, HZ=300mm, CZ=400mm, OL=700mm, A=60mm,

Resistance 2.24 Specify As: S-U,20/300/700/60/2.24

VINER Industrial Silicon Carbide SiC heating elements Type:

ED (Rod,Straight)type, Utype, Wtype, Ltype, Slottype,Single Spiral, Double Spiral, UX type

 

Notes for using and installing the heater:

1. Heater should be protected against damp during storing or installing to ensure the performance of the heater.

2. In order to be sure of well-distributed lod of each and groups, heater should be divided before assembling. The tolerance of the resistance of each one cannot exceed by 10% each other.

3. Heater is hard and brittle, please be careful when assem bling and maintaining so as to avoid damage.

4. When operating the electric furnace at the beginning, the voltage should be increased slowly and cannot be fully loaded at once. Otherwise the larger current will be resulted in the damage of heater.

5. When heater is damaged and need to be changed, the resistance of new ne should follow the increasing resistance. If many are damaged or resistance increased too much, heater should be changed.

6. Silicon Carbide (SIC) heating elements is a non-metal electric heating element made from SiC as its main raw materials. It has some specific properties, such as low expansion coefficient, little deformation, stable chemical property, long service life, easy installation and maintenance, etc.

7. Usage: Silicon Carbide (SIC) heating elements can usually make use for furnace which temperature from 600-1600. It can be directly used in an air atmosphere, without any protection atmosphere. It is extensively used in the fields of metallurgy, ceramics, glass, machinery, analysis test, semiconductor, science & research and so on.

 

Silicon Carbide SiC heating elements Packaging:

In Standard Wooden Case, VINER Industrial could be lifting packing.



Silicon Carbide SiC heating elements Shipment:

VINER Industrial could supply you the follow shipping way for your choice:

--By DHL/Fedex (Door to door, Home delivery service)

--By Air to your nearest Airport

--By Sea to your nearest Seaport

--By the sellers shipping agent

 

We produce different type SiC heating elements, GD( straight) U-shape W-shape single spiral double spiral Slot, the sizes could be according to customers' design.  

 

Welcome to visit manufacture line!! Wait for your testing our high temperature SiC heating elements!!

 

Company Information

VINER Industrialspecializes in SiC heating elements with ED (Rod, Straight) type, U type, W type, L type, Slot type, Single Spiral, Double Spiral, UX type and diameter 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 25mm, 30mm, 31.7mm (1.25inch), 35mm, 38.1mm (1.5 inch), 40mm, 44.4mm (1.75 inch) to 54mm (2.125 inch), 75mm (2.95 inch). Also different sizes and kinds of high temperature furnaces, such as Muffle Furnace, Vacuum Tube furnace, Vertical Tube Furnace, Rotary Tube furnace, Vacuum Crucible furnace, Vacuum Box furnace, Atmosphere Furnace, Bottom Loading furnace, and Vacuum Drying Oven, the chamber sizes could be according to customers' design.  

 

What is more,VINER Industrialproduces and supplies high temperature Kiln Furnace Spare Parts including MoSi2/SiC/Resistance Wire heating elements, Ceramic Fiber Insulation, Alumina/Zirconia Ceramics, Silicon Carbide Ceramics, Boron Nitride (BN) Ceramics, Vacuum Flanges, Thermocouple, PID Temperature Controller, and Quartz Furnace Tube. Ps kindly inquiry us, we will try our best to serve you.

 

Welcome to visit manufacture line!!

 

Guaranteed Quality:Our SiC heating elements are warranted to be free from defects in materials or workmanship for 2 years from the date of purchase. Within this period, Across International will, at its sole options, replace any components that fail in normal use. Such replacement will be made at no charge to the customer for parts, provided that the customer shall be responsible for any transportation cost. This warranty does not cover consumables and failures due to abuse, misuse, accident or unauthorized alteration or repairs.

 

Sound after Sales Service:We provide sound after sales service. We provide 24 hours consultation service. We are ready to answer your consultations at any time. 

 

Our Services

1. Your inquiry related to our products or prices will be replied within 24hours

2. Guarantee samples quality same as mass production quality

3. All our products have 2-years warranties.

4. Offering the support to solve the problem in the application or selling period.

5. Competitive prices based on same quality 

 

FAQ

1. Can you accept OEM?

 Yes! We can manufacture as per your request size.

2. Can you deliver the goods via our shipping agent?

 Yes, we could help you make the delivery using your shipping agent

3. Can you supply sample:

We could like to give you suitable suggestion about the SiC heating elements according to your detail application.

4. What about your After-sales service:

We promise that we can change or refund products if there are any quality problem.