Ultrasonic Welding Machine for Non Woven Bag Handle Pattern

Product Description

1. Equipped with air pump, air pump pressure up to 8 kg can be;
2. Place the ultrasonic generator (electric box) under the machine table along the slide.Insert the connectors at the end of the electric box (do not insert in the opposite direction). Turn on the power.Press the test to see if the ultrasound is normal.Under normal conditions, the meter is at 0%,The upper gauge is within *0%;
3. Connect the air source air pipe for 8 mm standard air pipe.The sides of two transparent white bottles connected to the entrance on the machine bracket,After the pipe is inserted, open the air source switch to supply air to the cylinder;
4. The material to be welded is placed on the machine in the right position for welding,Press the pedal switch of the machine with your foot to see the welding effect.If the welding is not firm, the delay device inside the electric box needs to be adjusted to prolong the welding time.need to rotate it clockwise to make numerical value bigger.If there is perforation in the welded material, the welding time is too long,at this time, it is necessary to rotate the counterclockwise delay device to shorten the welding time.
5. (Note: The delay device is inside the electric box.Open the side panel of the electric box and you can see a square component with a number on the top.The top can be rotated by hand.)