Double station blowing molding machine

Description

The 2L**6L double station blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of DHD*2L, DHD*5L, DHD**0L and DHD**6L. The same as the single station machines, it can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest capacity of the product can be *0L, and its production capacity is *0 to *0% more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production. Setting: Clamping***********-Double station+Hight-precision guide+large arm cylinder axle Extrusion system*-Hard gear surface reducer+Japan inverter Die system*********-Central-incoming extrusion die with special steel Hydraulic system*-Japan hydraulic valve seal and proportional control Control system***-Japan PLC+Imported HMI+PLC automatic Specification � DHD*2L DHD*5L DHD**0L DHD**6L Material � PE�PP� PE�PP� PE�PP� PE�PP� ***** capacity L 2 5 *0 *6 Number of die set 1�2�3�4 1�2�3�4 1�2�3�4 1�2�3�4 Output pcs/hr **0�2 **0�2 **0�2 **0�2 Machine Dimension m 2.7�2.0�2.5 3.4�2.2�2.6 3.9�2.3�3 4.9�4�3.1 Total weight ton 4 6.5 9.5 *0 Accumulator head � DHD*2L DHD*5L DHD**0L DHD**6L Number of die heating zone 3 3 3 4 Power of die heating KW 4.2 5.8 **7 **7 Max die-pin diameter mm *0 *0 **0 **0 Center distance of twin-die mm **0 **0 **0 **0 Center distance of tri-die mm *5 **0 **0 **0 Center distance of four-die mm *5 *5 **0 **0 Clamping Unit � DHD*2L DHD*5L DHD**0L DHD**6L Clamping force KN *8 *0 **0 **5 platen opening stroke mm ******0 ******0 ******0 ******0 platen size mm **0�**0 **0�**0 **0�**0 **0�**0 Max mould size mm **0�**0 **0�**0 **0�**0 **0�**0 Mould thickness mm ******0 ******0 ******0 ******0 Extruder Unit � DHD*2L DHD*5L DHD**0L DHD**6L Screw diameter mm *0 *0 *0 *0 Screw L/D ratio L/D *4:1 *4:1 *5:1 *5:1 Extruding Volume Kg/hr ****0 ******0 ******0 ******0 Number of heating zone zone 3 3 4 4 Extruder heating power KW **6.6 **8.2 8.**9.3 8.**9.3 Extruder driving power KW ****8.5 ****7 ****5 ****5