Sell G10 Pneumatic Pick

Description

Instruction The pneumatic pick is suitable for drilling in mine, crushing incompetent bed, concrete and clay, destroying hard or frozen stratum and other athletics occasion which need impact. Technical Specification Total Length **5mm Weight *0.9kg Rammerweight 0.9kg Rammer dia *8mm Rammer stroke **5mm Air pressure 0.*3Mpa Impact energy *3J Impact frequency *6Hz Air consumption *6L/s Air pipe inner dia *6mm Drill **0mm Maintenance Pneumatic pick is a exactitube tool that make reciprocating impact, should pay attention to maintenance. Please abide the following maintenance rules. 1�Air pipe inner dia is *6mm and length is not excess *2 m, the air pressure should be kept at 0.**0.6Mpa, and keep air pipe clean and fasten hose nipple. 2�When assembling machine, check clearance between drill shank and fixing sleeve, hold handle and force pressure to it slowly, ensure that work normally. 3�Working regularly, oil machine through the pipe connecter every **3 hours(**4.5°E*0 turbine oil) 4�Do not insert the whole machine into ledge, when drilling incompetent bed. 5�When machine was jammed in crevice, do not draw out it powerfully, it will damage machine. 6�If dirty block strainer, romove it.Don�t take off strainer. 7�When using machine, dismantle it at least twice a week, use diesel oil to clean and dry, then oil, later assemble and operate machine.