Sell G20 Pneumatic Pick

Description

Instruction The G*0 pneumatic pick is suitable in the mining industry to interrupt the coal bed and to destroy the soft ore; or in civil engineering and underground construction, . Specification Length **2mm Weight *0kg Rammer dia *0mm Rammer stroke **5mm Impact energy *0J Impact frequency *6Hz Air consumption *3L/s Air pipe inner dia *6mm Pick drill ******0MM Maintenance 1�Air pipe inner dia is *6mm and length is not excess *2 m, the air pressure should be kept at 0.*3Mpa, and keep air pipe clean and fasten hose nipple. 2�When assembling machine, check clearance between drill shank and fixing sleeve, hold handle and force pressure to it slowly, ensure that work normally. 3�Oil machine every **3 hours(**4.5°E*0 turbine oil) 4�Do not insert the whole machine into ledge, when drilling incompetent bed. 5�When machine was jammed at crevice, do not drawout it powerfully , it will damage machine. 6�If dirt block strainer, romove it .cannot disassemble strainer. 7�When using machine, dismantle it at least twice a week, use diesel oil to clean and dry , then oil, later assemble and operate machine.