Dreambox dm7020si

Description

Dreambox dm***0si Powerful receiver for digital TV and Radio programs. Main features are a **0 MHz PowerPC (**0 Mips), Linux OP and the dreambox DM***0 supports standard Linux API (DirectFB, Linux-FB, LIRC, *****) *0/**0MBit compatible Ethernet Interface DSL communication port All devices of series DM***0 have an embedded analoge modem Technical datas - **0 MHz PowerPC Processor(**0 Mips) - Linux open source (most parts under the terms of GPL) - Supports Linux Standard API (Direct-FB, Linux-FB, LIRC) - 1 x DVB Common-Interface Slot - 2 x Smartcard-Reader - Integrated Compact Flash Interface Slot - MPEG2 Hardware decoding (fully DVB compliant) - Common NIM DVB-S - *0/**0 MBit compatible Ethernet Interface - modem - USB Port - *2V switch cinch - V. *4/RS**2 Interface - Big-size LC-Display - *2 MByte Flash - *6 MByte RAM - integrated IDE UDMA*6 Interface - Support for internal HDD in any capacity - unlimited channel lists for TV/Radio - channel-change time < 1 second - full automatic service scan - supports directly bouquet-lists - supports EPG (electronic program guide)&#**9; - supports own videotext - supports multiple LNB-Switching control (supports DiSEqC) - fully adaptable OSD in many languages and skin-support - S/PDIF Interface for digital bit stream out (AC*3) - 2 x Scart-interfaces - RF modulator - Audio/Video cinch out - MINI-DIN connector for extern IR (send) DreamBox DM***0 technical data DBS-Tuner: Frequency Range **0.***0 MHz Signal Level - *5 dBm. - *5 dBm Signal-to-Noise Level *2 dB max. DBS-Tuner Input Connector F-Type female Input Impedance *5 Ohm AFC +/- 3 MHz Demodulation Shaped QPSK FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8 Roll-off Factor *5 % Demultiplexing according ISO ******1 Common-Interface: Common-Interface Power Consumption max. 0, 3A/5V Video decoder: Video Compression MPEG*2 and MPEG*1 compatible Video Standard PAL G/ *5 Hz Video Formats 4: 3 / *6: 9 Letterbox for 4: 3 TV-Device Audio decoder: Audiokompression MPEG*1 &mp; MPEG*2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: *2 kHz, *4.1 kHz, *8 kHz, *6 kHz, *2.*5 kHz, *4 kHz Output analog: Output Level L/R 0, 5 Vss on **0 Ohm THD > *0 dB (1 kHz) Crosstalk < **5 dB Output digital: Output Level 0, 5 Vss on *5 Ohm Sampled Data Filtering *2 kHz, *4.1 kHz, *8 kHz S/PDIF-Output optical (AC3) Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on *5 Ohm Teletext filter in conformity with ETS **0 **2 Standard> TV-Scart: Output: FBAS, RGB, S-Video over OSD selectable VCR-Scart: FBAS Serielle Interface RS **2: Typ RS**2 bidirectional Bitrate **5, 2 kBit/s max. Plug Connector SUB-D*9 Function: Update of Firmware Ethernet: *0/**0 MBit compatible interface Function Update of Firmware USB: USB 1.2 connector Mini DIN: I2C for steering of external devices IR funktion Pins: 1 5V 2 SDA (I2C-Kanal 2) 3 SCL 4 3, 3V 7 GND 8 IR-Output 9 GND UDMA*6 IDE Interface: Intern for connect HDD Compact Flash - Reader LNB power and polarisation: LNB Current **0mA max.; Short-circuit-protected LNB Voltage vertical < *4V no load, > *1, 5V at **0mA LNB Voltage horizontal < *0V no load, > *7, 3V at **0mA LNB shut-off at Standby-Mode Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Power consumption: < *0W (in operation, horizontal polarization / **0mA LNB current) < *1W (in operation, no LNB) < 4W (Deep-Standby-Mode) Input voltage: **0V / *0 Hz alternating current +/- *5% Physical specification: Ambient Temperature **5 oC*******5 oC Humidity < *0% Size (W x D x H): **4 mm x **0 mm x *5 mm Weight: 1, 8 kg without HDD