phohp hid ballast

Description

1)The firslty creation in the world, Without concussion for bulbs when HID start, Prolong 2 times of bulb lifespan. 2)Cold bulb switch current is < 6A, you know the original fuse is 7.5A, if the switch current is too high will be damage the original circuit and most of the other suppliers is over *0A. 3)Hot bulb switch current is <3.5 A, no affection to the car&#**9;s device when you change the lighting from high to low.However most of other suppliers are over *0A. 4)Hot bulb switch power is <*5W, it will not damage the tube when we start the hot bulb.However most of other suppliers are over *5W. 5)Cold bulb switch power is <*2.5W, it will not damage the tube and the arc.However most of other suppliers are over **5W. 6)When the vehicle vibrating, the power change is less than 1W, will not damage the arc.However many other suppliers are over 3W. 7)when the old bulb power is over **5V , our ballast can be match this bulb to working and prolong the bulb ***0 hours life.but others ballast can not, because their working range is *****5V. 8)Frequency is close to HELLA , and efficiency is also close to HELLA, but over *5%. 9)The ballast which we manufacture is according to the parameter of bulb and criterion of factory, then protect the tube electrode and match each other very well. *0)Our all products passsed QA(quality assurance), QB, QC(quality control) testing before leave factory. *1)Our all ballasts passed Special Six tests before leave factory.