dreambox 800hd pvr

Description

dreambox **0hd pvr Powerful receiver for digital TV and Radio programs Main features are a **0 MHz processor the Dreambox DM**0 supports the Linux TV API have a look to HighDefinition TV on your Dreambox *0/**0MBit compatible Ethernet Interface DVI connector plug & play Tuner brilliant OLED display SATA for use either as internal HDD 2, 5 or eSATA - **0 MHz MIPS Processor - Linux Operating System - OLED - Display - MPEG*2 / H.**4 Hardware decoding - Tuner: DVB-S, optional: DVB-C, DVB-T - Tuner Module, Plug&Play - 1 x Smartcard-Reader - V.*4/RS**2 Interface - *0/**0Mbit Ethernet Interface - 1 x Scart (RGB, FBAS or S-Video) - DVI - 2 x USB 2.0 - analog modem - S/PDIF Interface for digital bit stream out (AC*3) - *4 MByte Flash, **6 MByte RAM - SATA - for use either as internal SATA HDD 2, 5 - or to use for extern eSATA - unlimited channel lists for TV/Radio - channel-change time < 1 second - automatic service scan - directly bouquet-lists - EPG (electronic program guide) - multiple LNB-Switching control (supports DiSEqC) - OSD in many languages and skin-support - Videotext Decoder - extern *2V power supply DreamBox DM**0 technical data DBS-Tuner mit DVB-S2: Frequency Range **0 ***** ***0 MHz Demodulation DVB-S (QPSK); DVB-S2 (8PSK, QPSK) Symbol rate DVB-S: 2 ***** *5 Mbaud/s, SCPC/ MCPC DVB-S2: *0 *1 Mbaud/s (8PSK) , *0 *0 Mbaud/s (QPSK) Video decoder: Video Compression MPEG*2 and MPEG*1 compatible, H.**6 Video Formats 4:3 / *6:9 Letterbox for 4:3 TV-Device Audio decoder: Audiokompression MPEG*1 & MPEG*2 Layer I and II, MP3 Audio Mode Dual (main/sub), Stereo Frequency: *2 kHz, *4.1 kHz, *8 kHz, *6 kHz, *2.*5 kHz, *4 kHz Output analog: Output Level L/R 0, 5 Vss on **0 Ohm THD > *0 dB (1 kHz) Crosstalk < **5 dB Output digital: Output Level 0, 5 Vss on *5 Ohm Sampled Data Filtering *2 kHz, *4.1 kHz, *8 kHz S/PDIF-Output optical, Toslink Ausgang Video: Ausgangspegel FBAS 1 Vss +/- 0.3 dB an *5 Ohm Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on *5 Ohm Teletext filter in conformity with ETS **0 **2 Standard TV-Scart: Output: FBAS, RGB, S-Video Serielle Interface RS **2: Typ RS**2 bidirectional Bitrate **5, 2 kBit/s max. Plug Connector SUB-D*9 Function: Update of Firmware Ethernet: *0/**0 MBit compatible interface Function: Update of Firmware Analoge modem: analoge modem for Internet connection SATA Interface: - for use either as internal HDD 2, 5 or eSATAor internal 2, 5" HDD USB 2 x USB 2.0 Host LNB power and polarisation per tuner: LNB Current **0mA max.; short-circuit-protected LNB Voltage vertical < *4V no load, > *1, 5V at **0mA LNB Voltage horizontal < *0V no load, > *7, 3V at **0mA Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Power consumption: < *5W at *2V External PSU Input: ******0V AC / ****0Hz / 0, 6A Output: *2V = / 3, 0A Physical specification: Ambient Temperature **5°C*******5°C Humidity < *0% Size (W x D x H): **5 mm x **0 mm x *0 mm