dreambox 500s

Description

dreambox **0S Description: The Dreambox DM ***-Si is the first Linux based DVB Receiver. This receiver runs on open-source software developed by hundreds of developers around the world. This is the ultimate machine. It has many differnet skins that can be applied to make the user experience completely customizable. If you&#**9;re looking for a VERY powerful Dreambox DM ***-Si, and something to have fun on, this is Dreambox DM ***-Si for you. This unit has a great EPG and supports Personal Video Recording. You can attach this unit to your Windows based network at home and record your favourite tv programs right onto your hard drive. DreamBox DM ***-Si : The DM**0Si is the smallest Linux satellite TV receiver, with 1 x Smartcard-Reader. **0 MHz IBM PowerPC Processor (**0 Mips) 2 LED status Linux Operating System Full automatic service scan Supports directly bouquet-lists (indirect unlimited) Supports multiple LNB-Switching control (supports DiSEqC) 1 x Smartcard-Reader Unlimited channel lists for TV/Radio SPDI/F nterface for digital bit stream out (AC*3 / DTS) MPEG2 Hardware decoding Channel-change time < 1 second Fully adaptable OSD in many languages (skin-support) **0Mbit full duplex Ethernet Interface Supports EPG (electronic program guide) 1 x Scart-interfaces (fully controlled by software) Video decoder: Video Compression MPEG*2 and MPEG*1 compatible Video Standard PAL and NTSC Video Formats 4:3 / *6:9 Footage *6:9, automatic assimilation for *6:9 TV-Device (over Scart) Letterbox precolating for 4:3 TV-Device Audio decoder: Audiokompression MPEG*1 & MPEG*2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: *2 kHz, *4.1 kHz, *8 kHz, *6 kHz, *2.*5 kHz, *4 kHz Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on *5 Ohm Teletext filter in conformity with ETS **0 **2 Standard TV-Scart: Output: FBAS, RGB, S-VHS over OSD selectable DBS-Tuner: Frequency Range **0 .. ***0 MHz Signal Level - *5 dBm .. - *5 dBm Signal-to-Noise Level *2 dB max. DBS-Tuner Input Connector F-Type female Input Impedance *5 Ohm AFC +/- 3 MHz Demodulation Shaped QPSK Input Symbol rate 2 .. *5 Mbaud/s, SCPC / MCPC FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation Roll-off Factor *5 % Demultiplexing according ISO ******1 Ethernet: **0 MBit compatible, bi-direktional interface Function Update of Firmware and Preprogramming LNB Power and polarisation: LNB Current **0mA max. ; short-circuit-proof LNB Voltage vertical < *4V without load, > *1, 5V at **0mA LNB Voltage horizontal < *0V without load, > *7, 3V at **0mA LNB shut-off at Standby-Mode Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Output digital: Output Level 0, 5 Vss on *5 Ohm Sampled Data Filtering *2 kHz, *4.1 kHz, *8 kHz S/PDIF-Output optical (AC3) Output analog: Output Level L/R 0, 5 Vss on **0 Ohm THD > *0 dB (1 kHz) Crosstalk < **5 dB Serielle Interface RS **2: Typ RS**2 bidirectional Bit rate **5, 2 kBit/s max. Plug Connector SUB-D*9 Function Update of Firmware and Preprogramming Power consumption: < *0W / *2V Input voltage: DC*2V, alternating acurrent +/- *5% Extern power supply: Input: ******0V AC / ****0Hz / 0, 6A Output: *2V = / 1A Others: Ambient Temperature **5°*******5°C Humidity < *0% Accessories Manual X1, Control remote X1, Cables, Packing