Cycloidal Reducer

Description

The cycloidal gear profile is a form of toothed gear used in mechanical clocks. The gear tooth profile is based on the epicycloid and hypocycloid curves, which are the curves generated by a circle rolling around the outside and inside of another circle, respectively. When two toothed gears mesh, an imaginary circle, the pitch circle, can be drawn around the centre of either gear through the point at which their teeth make contact. The curves of the teeth outside the pitch circle are known as the addenda, and the curves of the tooth spaces inside the pitch circle are known as the dedenda. An addendum of one gear rests inside a dedendum of the other gear. In cycloidal gears, the addenda of the wheel teeth are convex epi-cycloidal and the dedenda of the pinion are concave hypocycloidal curves generated by the same generating circle. This ensures that the motion of one gear is transferred to the other at locally constant angular velocity. Usually the pinion radius is made equal to twice the generating circle diameter since this gives radial dedenda which are convenient to manufacture on a hobbing machine. - **0% exchangeable to Sumitomo - Quality verified home and abroad - Performance about *5% of Sumitomo, while reasonably priced - Short delivery due to standardized inventory