Flammability Test Chamber

Description

Product explanation: This machine was strictly designed and manufactured to meet the requirements of UL***1�ASTM D***5 and ASTM D***7 standards. It is used to test the resistance on fire of cable, wire and other insulation material. This test is specified in UL***1 as �Flame tests�. Features: * This machine can record the burn time and finish experiment automatically. * It can open and close the exhaust system automatically. * Both FT and VW test can be performed by this machine. * A big window in the door makes viewing more convenient, and you can check the samples by two gloves . * Flame calibrating system is available. * Controled by PLC, and the touch-screen makes your operation more convenient and simple. * The burner is made in USA. * The flowmeter is made in Japan. Technical parameter: Power source: AC **0v *0Hz 3A. The interior capacity:4.5 m3. The capacity above the flame:2 m3. The inner diameter of burner:9.5**0.3 mm. The burner tilted angle: *0degree or incline *0degree. Gas:firedamp(at least *8.0percent pure, provided by clients). Clamps:3 sets. Burning times:0~**9 times adjustable. Burning times precision:**1time. Burning period:0~**9.9 s(standard requires *5s). Fire OFF period:0~**9.9s(standard requires *5s). Cable on fire timer:0~**9.9s(controled by button and displayed by touch-screen). Flame calibrating time:*4s**2s or *4s**2s(UL standard requires flame temperature must be rised from **0C to **0C in *4s**2s). The measuring range of flowmeter:0~***0ml/min. Flowmeter precision:2%. Flame height (VW*1 and FT*1):**5 mm. Flame height (FT*2):*0 mm. Thermocouple temperature:0~***0C. Exhaust system power: compressed air with 0.4 to 0.6Mpa. Exterior dimensions:***0�***0�***0 mm(W�D�H)