cone crusher

Description

Jaw Crusher configured for primary crushing of even hardest rock. Incoming material is crushed between jaw crusher fixed jaw plate and movable jaw plate through advancing and retreating motions of jaw crusher pitman arm. Jaw Crusher main shaft bearing with dust seal and oil bath lubrication. Our Jaw Crusher is designed for long service life with minimum maintenance for hard, tough, abrasive material and high capacity load.Jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry. Jaw crusher work principle: The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher. -The product use of world-class manufacturing processes, selection of the most high-end materials; -The base of bearing use of integrated steel structures; -The broken cavity using "V"-shaped structure, so that the actual width of feed is same as nominal line width; -The broken cavity is deep and without dead zone, increased capacity and output feed; -Lubrication system is safe and reliable, convenient of replace parts, easy to maintenance; -The outlet use of pad-style adjustment devices, convenient and reliable, large of adjustment range, and increase the flexibility of the equipment; -Low noise, less dust. Model Feeder Opening (mm) Max. Feeding Size (mm) Capacity ï&frac*4;ˆt/hï&frac*4;‰ Motor Power (KW) Weight (t) PE**0×**0 **0×**0 **5 **3 5.5 1.5 PE**0×**0 **0×**0 **0 ***5 *5 2.4 PE**0×**0 **0×**0 **0 ****0 ****7 7