Dreambox DM 500-S

Description

Powerful receiver for digital TV and Radio programs. Main features are a **0 MHz PowerPC (**0 Mips) Linux OP, the Dreambox DM**0 supports the Standard Linux API *0/**0MBit compatible Ethernet Interface **0 MHz PowerPC Processor Linux Operating System 2 LED status MPEG*2 Hardware decoding, DVB-S 1 x Smartcard-Reader (Dreamcrypt CA) 1 x Scart-interfaces (RGB, FBAS or S-Video) V.*4/RS**2 Interface *0/**0Mbit compatible Ethernet Interface analog modem S/PDIF Interface for digital bit stream out (AC*3) *2 MByte Flash, *6 MByte RAM unlimited channel lists for TV/Radio channel-change time < 1 second automatic service scan directly bouquet-lists EPG (electronic program guide) Videotext Decoder multiple LNB-Switching control (DiSEqC) OSD in many languages and skin-support external*2V power supply Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on *5 Ohm Teletext filter in conformity with ETS **0 **2 Standard TV-Scart: Output: FBAS, RGB, S-Video Serielle Interface RS **2: Typ RS**2 bidirectional Bitrate **5, 2 kBit/s max. Plug Connector SUB-D*9 Function: Update of Firmware Ethernet: *0/**0 MBit compatible interface Function: Update of Firmware LNB Power and polarisation: LNB Current **0mA max. ; short-circuit-protected LNB Voltage vertical < *4V no load, > *1, 5V at **0mA LNB Voltage horizontal < *0V no load, > *7, 3V at **0mA LNB shut-off at Standby-Mode Count of active satellite position: DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control) Power consumption: < *0W / *2V Input voltage: DC*2V +/- *5% Extern power supply: Input: ******0V AC / ****0Hz / 0, 6A Output: *2V = / 1A or 2A Physical specification: Ambient Temperature **5°*******5°C Humidity < *0% Size (W x D x H): **5 mm x **0 mm x *0 mm Weight: 0, 6 kg