PP Biaxial Geogrid

Description

Geogrid is a two-way polypropylene, high density polyethylene as raw material, in particular extrusion, and made of biaxially oriented. (1)High intension, high tenacity, high occlusive force with soilgravel, erosion-resistant, water drainage, light weigth. (2)Reinforce Excavation of Subgrade Reaction: setting sand cushion (height difference of not more than *0cm), rolled into the platform, the laying of grille, vertical axis to be the main force direction, vertical lap ****0cm, horizontal *0cm, Lap Department of plastic with banding, and in the laying of the grill every 1.**2m with U-nailing the ground, laying the geogrid should be back to filling material soft soil roadbed, rib side slope of embankment, enhance isolation, inhibit ground deformation, prevent crack by reflection, increase strength of roadbed. Product specifications TGSG TGSG TGSG TGSG TGSG TGSG TGSG ***5 *0/*0 *5/*5 *0/*0 *5/*5 *0/*0 *5/*5 *0/*0 material PP Tensiles trength(KN/m) longitudinal ≥*5 ≥*0 ≥*5 ≥*0 ≥*5 ≥*0 ≥*5 ≥*0 transverse ≥*5 ≥*0 ≥*5 ≥*0 ≥*5 ≥*0 ≥*5 ≥*0 Vertical / horizontal 2% elongation at tensile strengthï&frac*4;ˆKN/mï&frac*4;‰ ≥5.0 ≥7.0 ≥9.0 ≥*0.5 ≥*2 ≥*4 ≥*6 *7.5 Vertical / horizontal 5% elongation at tensile strengthï&frac*4;ˆKN/mï&frac*4;‰ ≥7 ≥*4 ≥*7 ≥*1 ≥*4 ≥*8 ≥*2 ≥*5 Vertical / horizontal nominal elongation /% ≤*5.0/*3.0 length *0M width 4M Remark "Our company can make products based on the different requirement from customers. "