Sell Gold hammer mill

Description

Application and performance

Hitting granulating machine is lately developmental new kind of crusher equipment. This kind of machine is designed for small-scale gold processing plant, especially adapt to free gold recovery. Assembled with Centrifugal Concentrator or jig can establish a processing plant, and it is very effective to recovery free gold. Since the technologic process doesn’t need add any chemicals, it is environment friendly. Using the advanced crushing structure, the crusher can achieve crush and grinding at one time. Choosing Mn*3 (High Manganese Material) the hammer head is longer life. It is especially suitable for the remote region, because of the simple structure, easy operation,maintenance and convenient for moving. You can operate it without receiving any special training.

Structures

The machine is consist of frame,rotor,hammer head and other parts,Motor drive the rotor through Elastic coupling .Materials was crushed by the hitting between rotating hammer and crushing plate.

Rotor is compose of rotor shaft,triangle belt,disc,hammer shaft,hammer and other parts.rotor shaft is fixing triangle plate and disc,plate is separated by axle sleeve,shaft amount to the plate and hammer hanged on shaft,rotor shaft will rotate with hammer.

Gold Centrifugal Concentratoris a new type of gravity mineral processing device., It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, but also used to recover gold from the old tailings. It is widely applied on recovering free gold in all particle size ranges, especially for recovery of fine gold which is lost during the operation of the gravitational concentrators (sluice boxes and jigs).

   Test showed that the machine is very effective for separating monomer gold in vein gold deposits as replacement of mercury plate. the recovery can be as high as *9%,  The cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1,**0 times. Especially for the case in recovering the natural gold in lode ore with *5% of the ore having a milling size of —0. **4mm, the recovery for the natural gold is expected up to *8%. For those natural gold of 0.**4mm in particle size, the recovery is *7%

    The gold centrifugal concentrator can treat particle sizes from below *0 microns up to a maximum of 6mm and is most commonly used for recovery in Gold and Platinum. Other recovery uses include Mercury, Palladium, Tantalum, Copper, Silver and Diamond Indicator Minerals.

Structure and Working Principle

     The machine is operated by motor via belt driving draft to make liner rotate at a high speed. Slurries are delivered to liner through feed pipe and are subject to stronger process of separation under the action of centrifugal force. Heavy mineral remains in the lattice chute of liner and light mineral is drained via tailing chute. Concentrate is discharged through outlet after one shift operation and shutdown of the machine.

Technical Parameters