Description
The
Tech*2 is the same tester GM Technicians use to diagnose GM
vehicles. The Vetronix Tech 2 comes with Authentic GM software and
provides support for on-board diagnostics on all GM systems ***2
thru ***2
Descriptions for GM Tech*2 PRO
Kit With CANDI Interface
Note：We offer the original GM TECH*2, if you want to
get copy version, PLZ contact our sales, we will offer it to you
well!
If you order this item, we can
provide you an extra card (*2 MB
PCMCIA Card) with any one of these following
softwares:
1. GM****2(Includes Holden
car)
2.OPEL****9 software
3. SAAB****0 software
4. SUZUKI ****0software
5. ISUZU****9 software
Please
note in your order the software of your choice. or you can contact
our customer service.
Features
Authentic GM software in the Tech 2
Flash means the most comprehensive diagnostic software available
for late model GM vehicles.
Support for on-board diagnostics on
all GM systems ***2 thru current year.
Removable hardware modules provide
insurance against scan tool obsolescence.
Large, easy-to-read backlit
screen.
RS**2 & RS**5 ports provide the
avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs,
Freeze Frame, and Failure Record for later review.
Ability to view the status of
vehicle diagnostic tests as they run.
Bi-directional
The authentic GM ****-current year
software will provide full bi-directional control when performing
power train, chassis, and body diagnostics.
Vetronix Tech*2
Specifications
Dimensions: *2"
Microprocessor: *2 bit, *6
MHz.
Memory: *2 MB flash type II PCMCIA.
Type III slot available for future expansion.
Communications: Integral RS**2
communication port.
Screen: 3.8" backlit monochrome with
full graphics.
Capability: **0 *0 pixels. Displays
up to 9 vehicle parameters at once.
Tech 2 Kit
Includes
1. Tech 2 Flash
Tester
2. *2 MB PCMCIA
Card with GM OE Applications
3.
Data/Sensor/Trouble Code Manual
4. DLC Cable, DLC
Loopback Adapter
5. *2V Cigarette
Lighter Power Cable
6. SAE *6/*9
Adapter
7. NAO *2/*9
Adapter
8. Candi
Module
9. Battery Power
Cable
*0. Storage
Case
*1.
DVD（Electronic Documentation V*3.0
andTIS
***0）
Optional
1. *2 MB PCMCIA
Card with OPEL****9 software
2. *2 MB PCMCIA
Card with SAAB****0 software
3. *2 MB PCMCIA
Card withSUZUKI ****0software
4. *2 MB PCMCIA
Card with ISUZU****9 software
An industry change in protocol from
OBD II to Controller Area Network (CAN) has begun. In order to
perform diagnostics on a vehicle that uses the CAN interface; you
will need the Tech 2 Flash and a CAN diagnostic interface module.
The module connects between the Tech 2 Flash’s diagnostic link
cable and the OBD adapter. Once the module is connected, it can be
used on all GM vehicle applications, even those vehicles using
other platforms such as OBD I and OBD II.
