Description
MSN and
Email:sale(at)obdiichina.com
Skype:obdiichina
VAG
VVDI Interface VAG Commander 8.6
VAG Commander 8.6 update to VAG VVDI interface
VAG COMMANDER V8.6 updated to VVDI interface.
do you know what the VVDI interface is ?
VVDI *-VAG Vehicle Diagnostic Interface
VAG VVDI interface can be compatible with abritus commander
for vag ,and ADD other software to programmer keys and mileage
corrections,abritus vag commander donot have those functions .this
VVDI interface can run abritus vag commander software ,but abritus
hardware cannot run VVDI's software.from this ,you can see that our
VVDI interface is much more stronger than abritus commander for
VAG
for more software update information,welcome to download the PDF
file from our website .
OBDIICHINA Commander for VAG is a Windows PC based
diagnostic software for the vehicles from VAG. With the help of
this tool you can perform operations with vehicles from the VAG
group, which are in most cases unsupported from the producer
diagnostic testers. The ABRITES Commander for VAG provides you also
a full diagnostic capabilities for VAG-vehicles.
Standard diagnostic functions:
Connect to the device using KWP***0 over TP2.0, KWP***0 over TP1.6,
UDS over ISO transport protocol (CAN), KWP***1 or KWP***0 over
K-Line
For all electronic control units reading identification data
For all electronic control units read error (DTCs)
For all electronic control units clear error (DTCs)
Scan all units
Broadcast requests
Measured values
Adaptation
Special functions:
Instrument CAN
- With this function you can establish diagnostic session with the
Instrument cluster using KWP***0 over TP2.0
- You can read current odometer value
- You can change odometer value
- Read/Program memory of instrument cluster immobilizer
- Reading security access code of the IMMOBILIZER
- Read/Write immobilizer related data
EZS -
Kessy (Q7/A6/Allroad)
- With this function you can prepare dealer key/learn dealer
key
- Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)
Instrument K-Line
- With this function you can establish disgnostic session with the
Instrument cluster via K-Line (KWP***1 or KWP***0)
- You can Read/Change odometer value
- Read PIN code
- Read/Write eeprom
- Read ROM/Flash from the Instrument cluster
Engine
Control Unit
- Read EDC*7/MED*7 flash memory
- Read/Write of flash memory (EDC*5, EDC*6 all types Read/Write
Flashmemory via OBDII (K and CAN). Calculation of
checksums while programming, ME7.1.1, MED9.x, ME7.5)
- Read/Write flash counters (EDC*6)
- Read/Write eeprom (VAG-EDC*5x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5,
VAG-Cartronic ME7.8.)
- Extracting Security access code / PIN (EDC*5, ME7.x,
VAG-Cartronic ME7.8, EDC*6, EDC*7, MED9.x, Simos PPD)
- Extracting Component security bytes (EDC*5, ME7.x, VAG-Cartronic
ME7.8, EDC*6, MED*7.5.1, MED 9.x, Simos PPD)
- Enable/Disable immobilizer (EDC*5, ME7.x, EDC*6)
- Odometer correction (EDC*5, EDC*6)
Kessy adaptation
- This function can be used for adaptation of brand new kessy units
to the car. This adaptation can be by CAN TP2.0, K-KWP***0 and also
can be used with Porsche Cayenne.
TV activation ED1/ED2
- Using this special function you can change speed limit of MMI
compatible vehicles to change speed where TV becomes OFF
Key learning
- With this function you can learn key/transponder to the
vehicle
Dump tool
- With this function you can calculate security access codes,
change odometer and so on from EEPROM dump from the correcponding
unit
Airbag
- With this special function you can Read/Write EEPROM memory of
the airbag module
- Clear the crash data of the airbag module
Custom Read/Write
- Using this application you can read/program memory in some
electronic control unit
PIN Convertor
Service interval
- Using this function you can perform reset of the service
reminder, reset of the service interval parameters or change
service interval options
Remote control adaptation
- Using this application, you can learn remote controls
Navigation
- Using this application, you can enable/disable the Eject button
of the Navigation system
Cruise control system
- Using this application, you can activate/deactivate a cruise
control system and change the related
steering wheel electronics( SWE) configuration if SWE unit is
available
Brake pads change
- Using this application, you can Open rear parking brake for pad
change, Close rear parking
brake, perform Parking brake function test
VAG VAG COMMANDER 8.6 LICENSE
1 AN**2 - KM-CAN
1 AN**3 - PIN-CAN
1 AN**4 - IMMO panel
1 AN**5 - IMMO panel EDC*6
1 AN**6 - KM/PIN K-Line
1 AN**8 - Flash Counters
1 AN**9 - Key learning
1 AN**0 - Airbag EEPROM
1 AN**1 - TV Activation
1 AN**2A- EDC*6 Odometer
1 AN**2B- EDC*6 EEP/PIN/IMMO-off
1 AN**4 - EDC*7 EEPROM
1 AN**5 - Flash Memory ECU
1 AN**6 - Dealer key learning
1 AN**8 - Dealer key learning Q7
1 AN**9 - Prepare Dealer Key Q7
1 AN**1 - ME7 EEPROM by CAN
1 AN**2 - CDC*2xx Programmer
1 AN**7 - Q7 ***8
Update
steps:
1. install commander update 1.3 software, click [read sn] to get
serial numberabout one min..
2. give serial number to your supplier, they will send you update
software
3. install commander update 1.3 software, click [read sn] to get
serial number, then click [UPDATE] and choose latest software,
click [OK], and software starts update
4. After update, there is notice message [UPDATE OK]
VVDI is the short of VAG Vehicle Diagnostic
Interface acronym, it is a common diagnostic interface made from
China, which is not **0% clones hardware. The VVDI diagnostic
interface works with own VAG IMMOPLUS software, you can also use
the VAG COMMANDER 8.6 software, it is 2 in 1 interface working with
two softwares at the same time. This interface owns more functions
than separate vag commander 8.6 or vag immo plus. It will be more
useful for customers. Working with VAG IMMOPLUS software, it will
support more models of CDC*2XX ,NEC*4C*4, golf 6 mm7. This
interface can be updated, it will support more car models later,
and update free in one year.
VVDI
latest upgrade
Update
on May *0:
1.
Bora 1.4T NEC*4C*2 model was added
2Q7, A6L models after Year ***9 were added
*************************************************- *********-
Update April *0
1. Support NEC*4C*2 miles Model ,creat agent keys, EPPROM data read
and write, Copy FLASH BY OBD.
2. Support GOLF6 MM7(9S*2) miles Model ,creat agent keys, EPPROM
data read and write, Copy FLASH BY OBD2.
3. Increase pre-programmed TA-specific chips , programmed chips *6
to TA2, TA3, TA4, TA5 chip.
*************************************************- *********-
VAG IMMO PLUS software
1. Support cdc*2xx of Year ***6 , mileage changes, creat keys,
EPPROM data read and write, FLASH data read.
(More HASH KEY than vag commander, more algorithms, support for
more models, and if do not to support the miles, you can use XPROG
data to flash and send you EPPROM to agents, we will try to
update
2. Support nec*3c*2 of Year ***8 , mileage changes, creat keys,
EPPROM data read and write, FLASH data read.
3. Support nec*3c*4 of Year ***0 , mileage changes, creat keys,
EPPROM data read and write, FLASH data read.
4. Support golf6 mm7, mileage changes, creat keys, EPPROM data read
and write, FLASH data read.
5. Support the chip of TP series production, tp*2, tp*3, tp*4,
tp*5
6. Support the chip of TA series production, ta2, ta3, ta4,
ta5
