Sell t-bar ceiling grid

Description

Ceiling t bar is consisting of the main tee ,cross tee and wall angle to make the grid system to support the lay-in ceiling tiles,It is easy for installation and maintance,

1.Rolled into moulds by galvanized steel coil and color-coated steel coil. 
2.It can be made into several specifications according to different kinds of ceiling.
3.Owing to be beautiful, high-strength, anticorrosive and waterproof, it can substitute for ceiling T-bar of Aluminum alloy.
4.T-bar can be divided into two series, including metric system and British system.

here is the size :

1) Main tee: 
A) *4 x *8 x 3, **0/***0(*2')mm 
B) *4 x *2 x 3, **0/***0(*2')mm 
Packing: *5PCS/CTN 

2) Cross tee: 
A) *4 x *2 x 1, **0/***0(4')mm 
B) *4 x *6 x 1, **0/***0(4')mm 
Packing: *0PCS/CTN 

3) Small tee: 
A) *4 x *2x **0/**0(2')mm 
B) *4 x *6 x **0/**0(2')mm 
Packing: *5PCS/CTN 

4) Wall angle: *0 x *2 x ***0/***0mm, *2 x *2 x ***0/***0mm 
Packing: *0PCS/CTN 

5) The length can be provided in accordance with customers' requirements 

6) Thickness: 0.*3 - 0.*0mm

1.) Determine the requirment ceiling level,mark the position and fix wall angle on the wall.

2.) Hang main tee with T-bar suspension hook.

3.) Insert cross tee to the main tee.

4.) Cross tee adjacent to wall angle light fittings

5.) Adjust the levels and alignments throughout the entire grid system accurately

6.) Install PVC gypsum ceiling tile or othermaterials ceiling panel.

main Tee:0.**5pcs/m2 

long cross tee:1.**0pcs/m2 

short cross tee:1.**0pcs/m2 

wall angle:0.**0pcs/m2