Description
Description: Hot transported material can very easily
damage the conveyor belt. To prevent possible damages, special high
temperature resistance canvas with high modulus, low shrink and
high breaking tensile strength is adopted as carcass. And EPDM
rubber or Chloro-butyl rubber with good heat-resistant performance
is used as cover rubber. By mixing some other high-temperature
resistance materials and with advanced technique, the belt made
better performance in heat resistance. That not only solves the
fabric shrinkage and deformation problems, but also avoids crucial
poor adhesion problem caused by high degree of saturation of
ethylene propylene rubber. The belt is excellent in heat
resistance, low elongation, light and with longer using life,
etc.
Application: cement plants, heating stations, power stations,
garbage incineration plants, chemical industry, steelworks, metal
foundries and metal processing industry, etc.
HR Belt Type
Selection:
1. Because of the difference of
the material and grain size, the surface temperature of the
conveyor belt is different.Bulkmaterialssuch ascoke
andiron ore have gaps，it
causes the air convection, so the temperature on the belt surface
is lower than that of the transported materials.
2. When conveying small size
material or powder, such as cement, aluminum, carbon black, etc.
The temperature of the material conveyed is mostly the same as that
on the belt surface, in this case, when choose the belt type, not
only the conveyed material temperature has to be known but also the
actual heat state of the belt surface has to be
gotten.
