1000BASE-BX-D R1490/R1310nm 20km CSFP Transceiver

Optcore CSFP********0DXR are high performance, cost effective compact SFP (CSFP) transceiver modules supporting data-rate of 1.*5Gbps and *0km transmission distance with SMF. The CSFP transceivers consist of two bidirectional channels inside a conventional SFP form factor and they will enable network system vendors to double port density and data throughput, while reducing network equipment cost. The transceivers are compatible with the Compact Small Form- Factor Pluggable (CSFP) Multi-Source Agreement (MSA). The CSFP transceiver consists of *-channel Bi-directional transceiver unit with five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the ***0nm DFB laser and the ***0nm PIN photo-detector. The CSFP transceiver module data link up to *0km in 9/**5um single mode fiber. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access. Conventional SFP will function when plugged into a C-SFP socket, at the same time no damage to C-SFP and host board if C-SFP module is plugged into a conventional SFP socket.