Optcore CSFP********0DXR are high performance, cost effective
compact SFP (CSFP) transceiver modules supporting data-rate of
1.*5Gbps and *0km transmission distance with SMF. The CSFP
transceivers consist of two bidirectional channels inside a
conventional SFP form factor and they will enable network system
vendors to double port density and data throughput, while reducing
network equipment cost. The transceivers are compatible with the
Compact Small Form- Factor Pluggable (CSFP) Multi-Source Agreement
(MSA). The CSFP transceiver consists of *-channel Bi-directional
transceiver unit with five sections: the LD driver, the limiting
amplifier, the digital diagnostic monitor, the ***0nm DFB laser and
the ***0nm PIN photo-detector. The CSFP transceiver module data
link up to *0km in 9/**5um single mode fiber. The optical output
can be disabled by a TTL logic high-level input of Tx Disable, and
the system also can disable the module via I2C. Tx Fault is
provided to indicate that degradation of the laser. Loss of signal
(LOS) output is provided to indicate the loss of an input optical
signal of receiver or the link status with partner. The system can
also get the LOS (or Link)/Disable/Fault information via I2C
register access. Conventional SFP will function when plugged into a
C-SFP socket, at the same time no damage to C-SFP and host board if
C-SFP module is plugged into a conventional SFP socket
Features
● *-channel Bi-directional optical
transceiver
● 1.*5Gbps Typical Data Rate and
compliant to ***0Base-BX IEEE**2.3ah
● ***0nm DFB laser transmitter and
***0nm PIN photo-detector for CSFP********0DXR
● Hot-pluggable CSFP
footprint
● Up to *0km on 9/**5µm SMF
● LC/UPC type pluggable optical
interface
● Achieve operational
compatibility with conventional SFP
● Metal enclosure, for lower
EMI
● Single *3.3V power supply
● Support Digital Diagnostic
Monitoring interface
● Compact SFP MSA compliant
● RoHS compliant and
lead-free
● Operating temperature: Standard:
0°C to **0°C Industrial: **0°C to **5°C
Applications
● Gigabit Ethernet
● Point to Point FTTH
Application
● Switch to Switch interface
● Switched backplane
applications
● Router/Server interface
● Other optical transmission
systems
Specifications
● Form Factor: Compact SFP
(CSFP)
● Data Rate: 1.*5Gb/s
● Wavelength:
Tx***0nm/Rx***0nm
● Fiber Type: SMF
● Max Distance: *0km
● Optical Components:
DFB/PIN
● Operating Temperature:
0~*0ºC(Standard) **0~*5ºC(Industrial)
● Diagnostics: Yes
● Connector: Duplex LC
