Description
1.
INTRODUCTION:
A stroboscope, also known as a strobe, works according to the
stroboscopic principle. It makes motion sequences visible which
otherwise cannot be observed by the naked eye : by synchronizing
the flash frequency to the movement of the observed object and
emitting intensive light pulse of short duration, the object is
always illuminated at the same point of its movement, so that it
appears to the eye as if it were motionless. And it is an
instrument used to make a cyclically moving object appear to be
slow-moving, or stationary. It is suitable for non-contact RPM
measurement, inspection and observation of moving parts.
PN**3C Rechargeable stroboscope is basically upgraded based on the
PN**1C. It contains the recharged cell inside and needs no **0V AC
power. With a rechargeable stroboscope, it will be no irritation
caused by operating with the electric cord and it is convenient for
operation. When charging completes (indicator off), it can work for
two hours without stop. It is widely used in Steel, Packing,
Printing,Textile industry.
2.
APPLICATIONS:
Moter,Packing,Printing,Textile industry ... ...
3.
SPECIFICATIONS:
1). Sensor Power Supply: DC 6V
2). Power: Maximum *0W
3). Flash Range: *0～****0 RPM
4). External Trigger: DC5～*2V pulse
5). Dimensions: **0mm×**0mm×**0mm
6). Weight: about 2.4kg
