Optical Time Domain Reflectometer OTDR

Description

� Product Description

TC***0 Series OTDR developed by TECHTX, which meet the needs on the wide range of measurement by FTTX, Metropolitan Area Network, Backbone Network and other optical networks.�
contact: skype: wztechtc icq:********2�
wztech(at)gmail.(com) �
TC***0 OTDR Technical Specifications�

Technical Specifications1�
Wavelength (nm)**0/*******0/*******0/***0/*******5�
Dynamic range (dB)**3/***2/***4/***6/***8/***4/*2/***8/*6/*************5�
Pulse width (ns)5, *0, *0, *0, **0, **0, **0, ****5, *0, *0, *0, **0, **0, **0, ***0, ***0, ***0, ****0, ****0�
Event blind zone (m)*2m2m�
Attenuation blind zone (m)*9m9m�
Linearity (dB/dB)� 0.*5 dB/ dB�
Loss threshold (dB)0.*5�
Loss resolution ratio (dB)0.*1�
Sampling resolution ratio (m)0.**5 to 8�
Sampling point*2K�
Distance uncertainty (m)� (1 m + 5� ***5� Distance + sampling interval)�
Distance scope (km)0.3 to**0�
Typical real-time refreshing duration (s)0.2�
Memory capacity of traceSD Card (2G), > ****0 pieces�
Duration of measurementDefined by user; 5sec, *0sec, *5sec, *0sec, 1min, 2min, and 3min are selectable�
General specification Interface category�
Dimension (H� W� D)**0� **5� *6 Optical interfaceFC/UPC (PC, and APC are selectable)�
Weight1.5kg Data interfaceUSB interface, SD card interface�
TemperatureRunning temperature **0 to *0�
Memory temperature **0 to *0 Visible failure orientation VFL�
Relative humidity0% to *5% (non condensation) Wavelength**0nm�
Power supplyLithium battery; Continuing working duration ? 8 hours Output power (dBm)? *3�
Warranty period*2 months Maximum testing distance3km�
Remarks: 1. The technical specification describes the ensured performance of the instrument when using typical PC model connector to measure. Without considering the uncertainty caused by optical fiber refractivity.�
2. Dynamic range is the data measured under the condition of the maximum pulse width and 3 minutes of average time. Dynamic range is the data measured under the condition of **0km/****0ns/3min.�
3. Measuring conditions of blind zone: Reflection event is within 4Km, reflection strength < **5dB. Measured by the minimum pulse width.�
4. Dynamic range measured when there is filter.�
5. Dynamic range measured when there is no filter.