Description
Products:
Overview
SINOV-TDM**0E is a new generation analog card with interchangeable
FXS_**0 and FXO_**0 modules. It can eliminate the requirement
for separate channel banks or access gateways.
The SINOV***0E contains 8 module banks. Each bank supports one
analog interface. The module banks may be filled with up to FXO_**0
or FXS_**0 modules enabling the creation of any combination of
ports. Scaling of an analog card solution is accomplished by simply
adding additional cards.
SINOV-TDM**0E works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a
Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open
Source and proprietary PBX, Switch, IVR, and VoIP gateway
applications.
Main
Features:
1 High
security: It adopts tertiary thunder preventing technology, can
prevent the thunder and lightning from striking
effectively.
2 No
additional power connector or supplier is required for the
operation of FXS modules, reduced the line wave of the power, has
improved the voice quality.
3 World
Wide Usable: Configurable line interface meet global telephone line
interface requirements.
4 User
could choose any of combinations of FXO_**0 or FXS_**0 modules
according to customer’s requirements.
5 *2 bit bus
master DMA data exchanges across PCI Express interface at
**0Mbytes/sec for minimum host processor intervention.
6 The high
stability firmware is exported / imported with DMA data
exchange, so it accelerated and reduced CPU load
greatly. Under the environment of the same hardware, CPU
rate of utilization is equal to CPU rate of utilization of using *2
port analog card.
7 It
supports all the functions of Asterisk PBX systems
needed.
8
Humanization is designed: The module socket that should be nipped
is all adopted and stuck to one slice of sockets, can prevent
stabing users finger effectively.
New
function:
1 Easy
to install , using way is same as DIGIUM Asterisk card
2 If
use Trixbox/Elastix/Freeiris2 IPPBX software, it can automatic
recognition our cards, don’t need to install any
drivers.
3 For
2U classis high
Product
Spotlight
SinoV-TDM**0E is a new analog card.
It can be used for connecting analog telephones and analog POTS
lines through a PC. It delivers the superior voice quality on both
FXO and FXS interfaces in all 8 ports.
· Adjustable Interrupt Routing
Design
· Interrupts Frequency
Adjustment
· Up to 8 Simultaneous
PSTN Calls (Per PCI Slot)
· Compatible with All
Commercially Available Motherboards
· *-Month “No Question Asked”
Return Policy
· Lifetime Warranty
Target
Applications
· Channel Bank Replacement / Alternative
· Small Office Home Office
(SOHO) applications
· Small and Medium Business
(SMB) applications
· Gateway Termination to
analog telephones/lines
Services and
Features
· Caller ID and Call Waiting
Caller ID
· ADSI Telephones
· Loopstart Signaling
Support
Technical
Specifications
· Up to 8 ports through a
combination of FXS_**0 and FXO_**0 modules
· Full-length analog
card
· Up to 2 quad FXS or FXO
modules
· RJ*5 connector
· **-bit *3MHz PCI-E and fully
PCI-E compliant, compatible with all commercially available
motherboards, and proper sharing of PCI interrupts
· *2 bit bus master DMA data
exchanges across PCI interface at **2 Mbytes/sec
· Autosense compatibility with
5 V and 3.3 V PCI busses compatible
· Power: 8.*1W Minimum, *8.*4W
Maximum at 3.3 V or 5 V.
· Operation temperature: 0°C
to *0 °C
· Storage temperature: **0°C
to **5°C
Operating
Systems
· Linux (all versions,
releases and distributions from 1.0 up)
Minimum Hardware
Requirement
· ***-Mhz Pentium III
· **8MB RAM
· Available PCI-E Slot
