Description
Four Row Cylindrical Roller Bearing Rolling Mill Bearing
FCD******0/*****1/BC4B *****6/VJ**2
Inner Ring: **0.**0mm
Outer Ring: **0.**0mm
Width: **0.**0mm
Chamfer: 3mm
Outer diameter of Inner Ring:**4.*0mm
Basic Dynamic Load Rating: ***0KN
Basic Static Load Rating: ***0KN
Gross Weight: **1kg
Material: Carburizing Steel
Brass Cage
Four row cylindrical roller bearings as rolling mill bearings are
mainly used on rolling mill stands, calenders and roller presses.
The four rows of rollers lends itself to carry large radial loads,
but no thrust capacity, for the given bearing cross section. Four
row cylindrical roller bearings are separable, the rings and
rolling elements could be separated, it is convenient to wash,
check, mount and dismount. Four-row cylindrical roller bearing can
only bear radial load; therefore, they must be installed with
groove ball bearings or angular contact ball bearings, it will be
the latter which bear the axial load. our row cylindrical roller
bearings are classified into FC, FCD, FCDP types.
Type FC four row cylindrical roller bearing consists of two outer
rings and one inner ring, which have two ribs on outer rings, a
center rib in the middle, and the inner ring without rib.
Essentially, type FCD four row cylindrical roller bearing is formed
by two type NN type of double row cylindrical roller bearings, so
it has double outer rings, double inner rings, and the inner ring
without rib.
Type FCDP four row cylindrical roller bearing consists of two outer
rings and two inner rings, which have two ribs on outer rings.
Type FC, FCD and FCDP four row cylindrical roller bearings permit
axial displacement in double directions of the housing relative to
the shaft. Therefore, they are suitable to be used as non-locating
bearings. Normally, their cages are made from solid machinery.
I.D Size range: above **0mm
FC******0: **0mm***5mm***0mm
FC******0: **0mm***5mm***0mm
FC******8: **0mm***0mm***8mm
FC******8: **0mm***0mm***8mm
FC******0: **0mm***0mm***0mm
FC******8E: **0mm***0mm***8mm
FC******2: **0mm***0mm***2mm
FC******2: **0mm***0mm***2mm
FC******6: **0mm***0mm***6mm
FC******0: **0mm***0mm***0mm
FC******0: **0mm***0mm***0mm
FC******0: **0mm***0mm***0mm
FC******0YA3B2: **0mm***0mm***0mm
FC******0: **0mm***0mm***0mm
FC******0: **0mm***0mm***0mm
FC******0: **0mm***0mm***0mm
FC******0: **0mm***0mm***0mm
FCDP******5: **0mm***0mm***5mm
FC******0: **0mm***0mm***0mm
FC******0: **0mm***0mm***0mm
FCD******0: **0mm***0mm***0mm
FCD******0A: **0mm***0mm***0mm
FC******0: **0mm***0mm***0mm
FCDP*******0: **0mm***0mm***0mm
FCD*******0: **0mm***0mm***0mm
