Description
HY-A6 is the fastest liner blow molding machine in mainland of
China by now. Its baking tunnel is separated from the blow station
so that time for mold opening is shortened with a result of speedy
blowing and high output, damage to machine is lessened so as to
keep reliable performance and prolong service life, as well as
machine runs more smoothly and steadily.
HY-A6 is controlled by PLC. The whole process from preform feeding
to bottle discharging is completed automatically with advantages of
labor saving and no pollution. HY-A6 consists of three main parts:
preform loading system, Heater channel & blow station.
MACHINE FEATURES:
1.�� Machine� use of advanced PLC control system ,�� stable in
performance, automatic preform feeding .��
2.�� Strong penetrability and good and swift distribution of the
heat by letting the bottles rotate by itself and revolute in the
rails simultaneously in the infrared preheater
3.� �High adjustability to enable the preheater to preheat preforms
in shapes by adjusting the light tube and the length of the
reflecting board in the preheating area, and eternal temperature in
the preheater with an automatic thermostatic apparatus.
4.��� High safeties with security automatic-locking apparatus in
each mechanical action, which will make the procedures turn into a
state of safety in case of a breakdown in certain procedure.
5.��No contamination and low noise with the air cylinder to drive
the action instead of the oil ������������ pump.��
6. ��
Air route design is divide
into two� parts ,
7.�� Ideal effect of the chilling with the chilling system
8.�� Low rejection rate: less than 0.3percent
�
|
� |
ITEM |
�UNIT |
HY-A6 |
Machine
� |
Clamping force |
Kn |
***0 |
|
Clamping stroke |
mm |
**0 |
|
Stretching stroke |
mm |
**0 |
|
Bottom stroke |
mm |
*0 |
|
Number of cavities |
�Cavity |
6 |
�
Container
� |
Max. container volume |
ltr |
2.0L |
|
Max Neck diameter |
mm |
*0 |
|
Max .container diameter |
mm |
**0 |
|
Max. container height |
mm |
**0 |
|
Theoretical output |
bph |
********0 |
�Electrical System
� |
Total power� |
KW |
*0 |
|
Heating power |
KW |
*8 |
|
Power supply |
������������ **0V/*0HZ |
|
Power consumption |
KW/H |
7(0.5L) |
�
Air system |
Operating pressure |
Mpa |
0.8 |
|
Low pressure consumption |
L/min |
***0?0.5L? |
|
Blowing pressure |
Mpa |
3.0 |
|
High� pressure consumption |
L/min |
***0?0.5L? |
|
Machine�size |
Main machine(L�W�H) |
cm |
**0***3***5 |
|
Preform auto-loader |
cm |
**5**5***5 |
|
Machine weight |
Kg |
***0 |
