2.45G directional active reader

Description

The integrated 2.4G active RFID reader is a 2.4G active RFID reader that combines an antenna and a reader. It uses the 2.4GHz ISM frequency band and uses wireless communication technology to collect the identification information of the target tag to achieve data collection; it supports outdoor use, The protection level reaches IP*7, which can be widely used in the positioning of personnel and assets, and the collection of wireless sensor data.
 

product description

The integrated 2.4G active RFID reader is a 2.4G active RFID reader that combines an antenna and a reader. It uses the 2.4GHz ISM frequency band and uses wireless communication technology to collect the identification information of the target tag to achieve data collection; it supports outdoor use, The protection level reaches IP*7, which can be widely used in the positioning of personnel and assets, and the collection of wireless sensor data.

Features

Product Features

Adopt 2.4G ISM free channel

**0 tags that can be read at the same time

Can work in complex environments

interface

Ethernet port (support PoE power supply)

Power interface (DC*2V)

RS**2C (serial line)

Environmental parameters

Working temperature: **0 ℃ ～ **5 ℃

Storage temperature: **0 ℃ ～ **5 ℃

Protection level: IP**1.

technical parameter

2.4GHz channel working frequency: ***0 MHz ~ ***3.5 MHz, ISM frequency band

Modulation method: GFSK

Number of channels: *0

Channel bandwidth: 2M

Air rate: 1Mb/S

RF power: <1mW

Air protocol: custom

Communication mode: one-way read-only

Recognition speed: **0Km/h

Anti-collision performance: read **0 tags/sec at the same time

Antenna gain: 8dbi

Radio frequency identification distance: >**0m

Communication interface: RS**2, RJ*5

Input voltage: DC 7.5V～*8V

Maximum working current: <**0mA

Product size: **5mm x**5mm x*0mm

Application area

This active directional reader is widely used in personnel, asset positioning, and wireless sensor data collection.