(PAAS) Poly acrylic Acid Sodium

Product Description

(PAAS) Polyacrylic Acid Sodium Description:

Sodium polyacrylate,It is colorless or light yellow, solid, alkalescent, ionizable and corrosive. 

It is non-toxic. Molecular formula: [C3H3O2Na] n. Macromolecular sodium polyacrylate is a kind of water precipitating agent and water-soluble macromolecular material developed with the adoption of internationally advanced technology, which can enable the viscosity increase of other aqueous solution or dispersion.

Therefore, the two major functions of this product are efficient flocculation and efficient thickening. 
 

Application

This product can be widely applied to potable water treatment, industrial water supply procedures, the treatment of various industrial waste water and spent liquor, urban living sewage treatment, brine refining process in chlorine-alkali industry, etc., and be used as precipitation and flocculation agent, synthetic detergent, precipitation aid, latex thickener, paper strengthening agent, concrete strengthening agent, synthetic fiber modifier, hardwater softener, pigment dispersant, soil modifier, etc. It also can be applied to the industries including papermaking, textiles, oil drilling, cosmetics, coating, metallurgical mine dressing, production of anhydrous sodium sulfate, dust-prevention agent, etc. 
 

Directions

(1) Prepare it into dilute solution with common concentration of about 0.1~0.5% before use, and determine the optimal dosage by small sample test.
(2) One-off surface water shall be adopted on putting solid powder, which means bending the head of water pipe into the angle of *5 degrees, discharging water and spreading the powder on the waterway. In this way,clotting and agglomeration can be effectively avoided. 
(3)In solution, it is advisable to mix at a low rate of *0~**0RPM and powerful mixing is prohibited in prevention from the occurrence of broken chain which may affect the efficiency.
(4)The recommended mixing duration is 1 hour.
(5)The dilute solution shall be prepared on request and not be kept too long.
(6)For a better application, the solution shall be added off the radically mixed part.
(7)The adding of solution shall be regular and continuous.    
 

Specifications: