1 Ton Polyester Duplex Flat Webbing Slings

Product Description

Polyester duplex flat webbing slings:

1. Rated load: 0.*0t**0.*0t; 

2. Material: **0% polyester;

3. Low elongation;

4. Standard: EN*****1:***0, JB/T********7 and AUS***3.*****7;
 

5. 1m to **0m optional, special length may be upon request;

6. Color: International standard;

7. Width: *5mm***0mm;​



8. Note: The material from which the sling is manufactured may be identified by the colour of the label or printing on the label: Polyester = Blue, Polyamide (Nylon) = Green, Polypropylene = Brown and the sling may also be dyed with a colour code to indicate SWL.

9. ALWAYS:

· Store and handle webbing slings correctly.

· Inspect webbing slings and accessories before use and before placing into storage.

· Follow safe slinging practices, as given overleaf.

· Position the bight for choke lift at **0° (natural angle).

· Position the sling so that the load is uniformly spread over its width and protect the sling from sharp edges.

· Apply the correct mode factor for the slinging arrangement.

NEVER:

· Attempt to shorten, knot or tie webbing slings.

· Expose webbing slings to direct heat or flames.

· Use webbing slings at temperatures above *0°C or below 0°C without consulting the supplier.

· Expose webbing slings to chemicals without consulting the supplier.

· Shock load webbing slings.

· Use webbing slings which are cut or which have loose or damaged stitching.

· Use a sling with a missing/damaged label or illegible markings

*0. Storing and Handling Webbing Slings

Never return wet, damaged or contaminated slings to storage. They should be cleaned with clear water and dried naturally. Never force dry webbing slings. 

Store webbing slings hung from non-rusting pegs which allow the free circulation of air.

The storage area should be dry, clean, free of any contaminates and shaded from direct sunlight.

Do not alter, modify or repair a webbing sling but refer such matters to a Competent Person.