Contact adhesive

Product Description

Contact cement is a neoprene based glue and can be thinned with toluene.
Contact Cement (SK***1)

Feature
The product is the single component of volatile dry type adhesive with perfect performance of high first adhesive ability, proper viscosity, easy for painting, high adhesive intensity and could be widely used in many fields for the bond materials.

Main Component: Neoprene

Technical Data
Description Parameter
Appearance Light yellow thick liquid
Viscosity (*5º C, mPa. S) ***0~***0
Solid Content (%) *4+/_2
Peel Strengthen (*5º C*8h, canvas-canvas N/2.5cm ) ≥*0

Scope of Application
This product could be used to bond rubber, plastic, leather, canvas, wood, metal, especially for the hard material bonding with soft material, like the bonding of rubber and metal. The application field is as wide as the construction decoration; Advertise sign, furniture decoration and machine manufacture etc.

Using Method
1. Clean the adhesive surface so as to avoid the effecting of the intensity. For smooth surface, it is better to passivity it with sand cloth (for rubber material, use file) firstly, then wash it with gasoline or acetone and dry.
2. Paint the glue onto the surface evenly, for rubber material; It is needed to paint the glue about **2 times. For canvas material, paint it **3 times. Every time of the painting, test the surface with hand. If there is no adhesive to the hand but having viscosity, it is okay for the second painting. Finally, bond the surface with pressure after leaving them for some time. The average leaving time is ***0 minutes. For the details, it should depend on the exact situation of surround. The glue quantity for painting every time is ******0g/m² .
3. The application adhesive could be achieved after drying for *8 hours at the room temperature of *5Centigrade. The best adhesive performance is available after leaving aside for 6 days.

Warning
1. The operating environment should be ventilate and should keep away of the fire.
2. Before application, the solidifying time could be reduced by adding natrium with ***5 percent, which could improve the adhesive intensity also.
3. Painting tools could be brush, scraper etc. And could wash them with Ethyl acetate and dry for next application.
4. Tighten the lid to avoid the volatile of the glue after usage. Dilute the glue with Ethyl acetate if it is too thick.
5. Take strict precautions against touching by the kids and swallowing.

Storage and Packing
1. Stock the products in the air-tight seal at the temperature of ****5Centigrade the shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life.
2. Preserve and transport as flammable products.
3. Packing specification: **0ml/tin, *2tins/ctn.