FOB Price
Get Latest Price|
- Minimum Order
Country:
China
Model No:
Chemicals, Coating & Paint
FOB Price:
Place of Origin:
-
Price for Minimum Order:
-
Minimum Order Quantity:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Product Group :
-
Contact Person Ms. ruby
Baiyun District, Guangzhou, China, Guangzhou, Guangdong
chemical former lacquer car coating
|
RAPICOAT 1K TINTERS Varied color cover full range with high color saturation |
| Substrates | Dried and sanded existing finishes, primers | |
| Substrates treatment | Remove paint dust and contaminations with degreaser before sanded | |
| Temperature Name 1K Basecoat color Thinner | ||
| Mixing ratio |
According to temp- erature to choose the Hardener and Thinner |
Volume Ratio 1part **1.2part |
| Remarks | At high temperature,it is recommended to use slow thinner or add proper retarder solvent to avoid defect. | |
| Pot Life | *4 hours at *0℃No. | |
| Spray viscosity | ****2 Minutes at *0℃ | |
| No. of coats | **3 coats, total ****5um | |
| Flash-off time | At *5℃, ***0 minutes between coats. Allow ****0 minutes air-drying time before applying clear coat. | |
| Each thickness | ****0Micron | |
| Spray Pressure | Gravity Feed 1.**1.5mm **4kg/cm2 Siphon Feed 1.**1.7mm **4kg/cm2 | |
| Drying Time | Temperature Dust Application time of next process | |
| *0°C 5 minutes ****5mintutes | ||
| Polishability | Use over P***0 sand paper if need polish | |
| Shelf Life | 3 years in original sealed (can continue to use after passing inspection ) | |
| Packing | 1LX*2tins/ctn,4LX4tins/ctn | |
|
Note: 1: If the existing finish is not compatible, 2K primer surfacer should be used as a sealing layer before applying the basecoat otherwise there may be problems such as lifting, peeling, blistering, flooding, etc.' 2: At temperature over *0℃ or in high humidity, it is recommended to use Retarder Solvent to avoid defect. 3: Because of the high transparency of metallic basecoat, the primer surfacer should be in consistent color and flat without any sand scratches, seediness, or unevenness so as to prevent spot defect, poor metallic effect, etc.' 4: To avoid problems of spot or poor adhesion, the metallic paint film should not be thicker than *5um. 5: Better effect could be achieved if the extra silver powder could be removed with tack rag after the flash-off of every layer.
|
||||||
| ||||||||||||||||||||||||||||||||||||||||||
![NANO Spray Chrome Plating System [JETYOUNG]](https://int.chinacdnb2b.com/p-B2804117-20130802081053/nano-spray-chrome-plating-system-jetyoung.jpg "NANO Spray Chrome Plating System [JETYOUNG]")
