Grain dryer

Product Description

HONGXING 5HP grain dryer
Scope of productivity include: product lots *2T, *6T, *5T
Specifications include: mobile type and stationary type. It can dry various grains and oilseed crops (rapeseed, wheat, barley, soybean, etc.). All the mechanical components are driven by three independent electric motors. The dryer has an independent electric control panel, including a temperature-controlled independent preset instrument.
 Its operating procedure is as follows: 
1. Pour the grains from the inlet of the spiral groove at the rear part of the machine, at the bottom of the horizontal spiral groove, and convey the grains into the dryers chamber. 
2. The chamber board is full of meshes. Vertical spiral conveyer rises to the center to lift the grains from bottom to top, and discharge the grains into the chamber. In the process of spiral conveying, it can guarantee continuous circulating heating of the grains to reduce saturated water content in the grains. The grain is dried through the burners thermal air circulation. The centrifugal fan absorbs and impels the airflow. The heated air, through the perforated screen in the inflated chamber, soaks the grain wall to remove the water content in the grains. A preset thermometer shuts off the burners operation. When the grains reach required temperature (humidity), the airflow cools down and the grains begin to cool. Center drill and three stirrers on the top of the cone can guarantee the movement of the grains, so as to remain drying and cooling circulation in the process of unified complete operation. The dried grains are discharged, via the rotary unloading trough at the top of the center drill, into right or left side of the machine. The mounting holes of the unloading trough at the top of the center drill allow the grains to flow into the unloading trough.