HEAVY FUEL OIL

Product Description

FUEL OILS SUCH AS MAZUT M**0 GOST *******9 (ANY GRADE) AND OTHER FUEL OILS
FUEL OILS MAZUT M**0 GOST *******9
When petroleum is distilled, fuel oil is produced as a residue or distillate. Any fuel oil is a form of petroleum that is burned to produce energy or heat for running an engine. These are usually low quality oils that are heated in a furnace or boiler and used in a number of industries.
MAZUT is such a fuel and is typically used in generating plants and factories. Of course different plants have expected requirements and specifications of their fuel and this is why MAZUT M**0 are produced according to industry ISO standards.
SPECIFICATIONS FOR HEAVY FUEL OIL / MAZUT M**0 (GOST *******9)
 
COMPONENT    RESULT
1. Ash content, not more %    0,*4
2. Mass fraction of Sulphur, not more % low Sulphur residual oil    0,5
3. Temperature of the flash, not less ºC in the    closed crucible
    In the open crucible ºC    **0 min
4. The temperature of solidification, not higher ºC    *5
5. Kinematics viscosity at *0ºC    **8 max
6. Water content    0.5%
7. Mechanical impurities    Lower than 0.1%
8. Acidity Lower than    5 mg KOH/ **0ml
9. Alkalinity    nil
*0. Gross Calorific Value Kcal/kg / KJ/kg    Min***0/****0
*1. Density at *5.0 deg. C Kg/l    0.***0.***0
*2. Hydrogen Sulfide Content (H2S) pom    0.5 max
*3. Carbon Residua    Lower than 7%
*4. Vanadium (V) ppm    *3
*5. Aluminium (Al) ppm    5
*6. Silikon (Si) ppm    *2
*7. Nickel (Ni) ppm    *9
*8. Asphaltenes m/m    3.6%
*9. *@********************   Extracted to **0 mm Hg    
   Initial Boiling Point deg. C    **6
        5% recovered deg. C    **9
       *0% recovered deg. C    **0
       *4% recovered deg. C    **8
       *0% recovered deg. C    **5
       *0% recovered deg. C    **2
       *0% recovered deg. C    **4
       *0% recovered deg. C    **8
       *5% recovered deg. C    **5
       *0% recovered deg. C    -
       *5% recovered deg. C    **0
       Final Boiling point deg. C    **0
       Percent Recovered vol    *8%
       Residue vol    *2%
   Total Nitrogen m/m    0.**2%
*0. Sodium (Na) ppm    *5