KH FT Wax 105

Product Description

Features:
High melting point
High stability
Low Viscosity
Low oil content
Good hardness
 
Application:
In PVC processing as the lubricants
Hot melt adhesives
Master batches
Rubber industries
Pigment and coating
Polishes
 
The fischer tropsch wax for pvc are made from carbon monoxide and hydrogen in the presence of the selected catalyst. Generally, the feedstock is produced from coal or natural gas. The final synthetic waxes tend to be the saturated, straight-chain hydrocarbons. Their very linear molecular structure results in high melting points, low viscosity, and good hardness.
 
In PVC processing. Fischer-Tropsch synthetic wax is mainly used as an external lubricant. It has the relative molecular mass of *******0. Since, compared to PE wax, Fischer-Tropsch wax has a low molecular weight, low melt viscosity, high melting point, and narrow melting range,  the same lubrication effect can be achieved with less dosage and reduce the negative impact of lubricant on the physical and mechanical properties of the PVC products. On adjustment of internal and external lubrication, it has the irreplaceable advantage than PE wax.
 
KH FT Wax **5 use the feedstock from coal, They have the fine crystal structure and narrow carbon distribution. Its low viscosity increases the production speed and fluidity of the PVC product. Besides, it can contribute to the dispersion of the pigment and other fillers. KH FT wax **5 can reduce the dosage by about *5%**0% compared to paraffin wax and PE wax.
 
In the processing and production of a masterbatch, KH FT wax **5  can effectively wet and penetrate into the pores of the agglomerated particles to coat the surface of the pigment, and better disperse the pigment aggregate under the action of the shearing force to effectively prevent re-agglomeration